Radon Mitigation Cost in Moore County, TN: $1340-$2450 Range
Quick Answer: The local planning range for radon mitigation in Moore County, TN is $1340-$2450, with a modeled midpoint near $1895. Use this as the county budget anchor first, then adjust the form for your foundation, result, and transaction goal.
Local Cost Range: Typical local pricing centers around $1895 and the common range is $1340 to $2450. This county prices close to the state midpoint, while older housing stock usually adds more routing and sealing variation.
Homes in Moore County have a predicted average indoor radon screening level greater than 4 pCi/L. This places Moore County in the highest-risk category defined by the EPA. Geological surveys indicate that the underlying rock and soil formations in this region naturally produce elevated levels of uranium decay, which releases radon gas into foundations.
Moore County Cost Range First
You searched for cost, so start with the local price range before the scenario details. Use this as the first budget anchor, then tune the form below for foundation type, reading, and whether this is a buyer, seller, or homeowner decision.
Modeled midpoint
$1895
Common range
$1340-$2450
Use when
You need a county price anchor before deciding whether quotes make sense.
Avoid
Negotiating from a generic national average. The county-specific range is the number that keeps the conversation grounded.
Next move
Adjust the form for your result and foundation before requesting quotes.
Enter the result. Pick the deal side. Get the route.
Use this as the local decision console: set the reading, deal side, and foundation clue before you compare quotes or seller-credit numbers.
Local midpoint
$1895
Modeled range
$1340-$2450
Decision side
Foundation clue
Choose your next step
Start from the exact job, not another generic radon article.
Pick the situation that matches Moore County, TN. Each route keeps the reading, deal side, or foundation clue attached so the next page answers the search instead of resetting the user.
Failed inspection
I need a repair or seller credit number
Open the local credit path with a 4.0+ buyer scenario already selected.
Open negotiation route4.0+ pCi/L
I have a high result and need the cost path
Go straight to the county estimate, quote context, and contractor checklist.
Open cost route2.0-3.9 pCi/L
I need to know if this number is bad
Use the level explanation first, then decide whether to retest, monitor, or price mitigation.
Open level routeNo test yet
I need the first valid result
Start with kit placement, timing, closed-house conditions, and result interpretation.
Open testing routeZIP cost search
Searching by ZIP? Use the Moore County range first.
ZIP-level contractor quotes still depend on the property, but the county range is the cleanest first budget anchor before you request bids or negotiate a credit.
ZIP anchors on this page
37352
Quote coach
Use this page like a quote coach, not just a calculator.
In Moore County, TN, the useful move is not memorizing one price. It is knowing when to test, when to quote, what number to anchor on, and which contractor answers should make you slow down.
Low anchor
$1340
Quote target
$1895
Upper planning range
$2450
No test yet
Do not quote first
Buy a short-term test or confirm an old result before calling installers. Use the $1340-$2450 range as planning context, not a reason to buy a system early.
2.0-3.9 pCi/L
Retest or plan
If this is a normal homeowner decision, retest under better conditions first. If you are buying, selling, or finishing a basement, keep the local average ready so the conversation does not drift.
4.0+ pCi/L
Get real bids
Get two or three quotes and compare them against $1895. A bid near $2450 needs a clear reason: crawl space membrane, difficult pipe route, sump sealing, electrical work, or finish repair.
Buying or selling
Negotiate cleanly
Start the repair or credit conversation around the local average and use $2450 as the upper planning range. Confirm the final scope with a local quote.
Copy this call script
Sound like you already know the job.
My lowest-level radon test was ___ pCi/L in Moore County, TN. Before you give me a number, can you tell me whether this needs sub-slab suction, crawl space membrane work, sump sealing, or a combination system?
I am comparing the quote against a local planning range of $1340-$2450, with $1895 as the target. Please break out anything that pushes the price above that target.
Ask these six questions:
- 1. What foundation condition is driving the price?
- 2. Where will the pipe route and fan sit?
- 3. Is sump cover, slab sealing, or membrane work included?
- 4. Who handles electrical, permit, and exterior finish details?
- 5. What post-mitigation retest proves the system worked?
- 6. What warranty covers the fan, labor, and follow-up adjustment?
Red flags
Slow down before you say yes.
- A quote that never asks for your reading, lowest level, foundation, sump, or crawl space details.
- A high price with no reason tied to route difficulty, sealing, membrane work, electrical, or finish repair.
- No post-install retest plan. The goal is lower radon, not just a fan on the wall.
- Vague warranty language or no clear follow-up path if the result stays elevated.
Bid checker
Is this quote fair enough to trust?
Enter the number you were quoted, mark what the written bid includes, then send the anonymized signal into the ledger without retyping it.
Foundation: Crawl Space
Result: 4.0+ pCi/L
The ledger handoff will carry ZIP, price, scope, foundation, and result band.
Below $1340
Only good if scope, retest, and warranty are still complete.
$1340-$2450
Normal zone. Compare inclusions, not just price.
Above $2450
Ask for the scope reason before accepting.
Observed quote layer
Already have a Moore County quote?
Add one anonymized quote, paid install, or seller-credit number. It helps compare the model range against real local pricing without exposing a street address.
Build Your Local Action Plan
Set your result band, home profile, and goal to see the right next move
Use Your Confirmed Radon Reading
Adjust the level to match your latest result and compare likely mitigation outcomes before pricing local quotes.
Warning: Action Required - EPA Threshold Exceeded
At 5.5 pCi/L, this reading is above the EPA action level. Use the local pricing below to budget your next step after confirming the result.
Typical mitigation systems reduce radon by 80-99%. Compare the local line items below before requesting quotes.
Crawl Space Factors
Crawl space foundations require additional work to seal the ground surface with a vapor barrier before the suction point can be installed. This adds material and labor costs compared to a standard basement installation.
Negotiation Note
Crawl space jobs take longer and use more materials. Expect quotes 10-25% higher than basement installations in the same area.
State Regulation Notice
Tennessee requires sellers to complete a Residential Property Condition Disclosure covering known defects and hazards.
View official state siteEstimated Local Range
Moore, TN
Estimated Total
Range: $1340 – $2450
| Component | Average Cost |
|---|---|
| System Materials | $1000 |
| Specialized Labor | $720 |
| Permits & Setup | $175 |
| Estimated Total Range | $1340 - $2450 |
| Average Total | $1895 |
Prices are dynamically adjusted for local market multipliers and represent standard sub-slab or basement installations. Real contractor pricing may vary based on structural complexity.
Local Cost Plan for Moore County Homes
Start with the local cost range, then only move into quote comparison after a real test result supports it. Moore County estimates center near $1895, but foundation type, routing, and whether this is a buyer/seller timeline can move the final quote.
- Keep the report, reading method, and test location handy so you can compare contractor recommendations against the same baseline.
- Use the Moore County, TN cost range here as your first budget anchor before you request quotes.
- If you are selling, compare the likely mitigation cost against the size of the credit you may be asked to offer.
- Plan a post-mitigation retest so the money actually buys a safer result, not just a fan installation.
- Get your home tested BEFORE listing. A clean result (<4.0 pCi/L) is a selling point.
Do not ask contractors what you should spend before you know your own budget range. Use the local estimate first, then compare quotes against that anchor.
Est. Total
$1895
No obligation, 30-second form
Request a quote-ready credit follow-up for Moore County
Send the opening ask, ceiling, fallback range, and county context so follow-up can focus on the deal number instead of rebuilding the situation. No obligation, no call blasts, and no auto-enrollment.
- Saved snapshot of this county, result band, and selected foundation
- Quote, retest, or deal notes you can use without rebuilding the page
- Priority and availability context only when it fits the scenario
Required now: Email + ZIP. Phone and priority help if timing matters.
Direct Answer
How much does radon mitigation cost in Moore County?
Estimated average mitigation cost in Moore County is $1895, with a common range of $1340 to $2450. Final pricing depends on foundation type, home size, and routing complexity.
| Evidence | Value |
|---|---|
| EPA Zone | Zone 1 |
| Average Cost | $1895 |
| Typical Range | $1340 - $2450 |
| Housing Units (Census) | 2,981 |
Instant Summary
Your 30-second local estimate snapshot
For Moore County, TN
Average
$1895
Typical Range
$1340 - $2450
Input Profile
Crawl Space, Under 2,000 sq ft
Goal: Selling
Data Freshness
2026-02-24
Source dates shown below
Primary Source
US Census Bureau, 2018-2022 American Community Survey 5-Year Estimates
Independent from contractors
Price Drivers
Why this estimate looks like this
Weights are model contributions, not exact line-item billing.
Local labor market pressure
38%
Labor usually drives the biggest spread in county-level pricing.
Foundation complexity (Crawl Space)
28%
Routing and sealing complexity changes by foundation type.
Permits and compliance
9%
State disclosure/license rules can add setup overhead.
Home size factor (Under 2,000 sq ft)
14%
Larger footprints often need longer runs and additional sealing points.
Benchmark
Moore County vs State vs National
All numbers use the same inputs: Crawl Space, Selling, Under 2,000 sq ft.
County Estimate
$1895
State Avg
$1895
+0% vs state
National Avg
$1975
-4% vs national
Moore County
$1895
TN state average
$1895
National average
$1975
Seller Credit Calculator for Moore County
Use your local budget anchor before you ask for repairs or credits. For a typical deal in Moore County, a reasonable planning range is $1895 to $2450 depending on scope, routing, and finish quality.
- Budget anchor based on your county and selected scenario
- Plain-English credit / quote request framing you can reuse
- Reminder that this is planning context, not legal advice or a contractor bid
Moore County Housing Statistics
Housing characteristics like age and foundation type can heavily influence radon risks and mitigation costs. Here is a snapshot of Moore County real estate data.
Older homes often require different sub-slab depressurization techniques.
Local Insight: Moore County
- Official local measurement signal for Moore County: the reported central result is 0.3 pCi/L, with 0.0% of reported tests at or above 4.0 pCi/L. The available series represents about 1 tests or tested properties. Caveat: Tennessee Health Data says county and ZIP values come from radon test kit and mitigation company data; results before about 2015 may not be included, and county or ZIP averages cannot predict an individual home's radon level. RadonVerdict uses the official county average layer and rolls the official ZIP 4.0+ layer up to primary counties..
- Housing stock profile: 63.1% of homes in Moore County were built before 1980 vs 57.7% statewide (higher by 5.4 percentage points). Older foundations often have more radon entry paths.
- Cost burden check: median home value in Moore County is $256,700 (state average $182,359). A typical mitigation project (~$1,895) is about 0.74% of local median home value.
- Market depth signal: Moore County has 2,981 housing units, which usually means a smaller contractor market; quote variance can be wider.
- Data provenance for Moore County: this housing profile comes from US Census Bureau, 2018-2022 American Community Survey 5-Year Estimates. Retrieved 2026-02-24.
- Peer comparison signal: Moore County shows a 89th percentile home-value profile and a 3rd percentile housing-volume profile in TN, influencing quote spread and negotiation leverage.
- Affordability context: estimated mitigation average ($1,895) is 0.74% of local median home value. This ratio is used to differentiate guidance for financing vs immediate remediation.
Frequently Asked Questions
Typical pricing in Moore County falls between $1340 and $2450 because this county prices close to the state midpoint, while older housing stock usually adds more routing and sealing variation. Final contractor quotes still move with foundation type and on-site routing.
The EPA classifies Moore County as Zone 1 because the predicted average indoor radon screening level exceeds 4 pCi/L. This is primarily due to the geological composition of the area — certain rock types (granite, shale, phosphate) naturally contain higher concentrations of uranium, which decays into radon gas.
In Zone 1 counties like Moore County, a significant percentage of homes test above the EPA's 4.0 pCi/L action level. While every home is different, the probability is substantially higher than the national average. Testing is essential before making any purchase decision.
Radon mitigation is not federally mandated. However, the EPA strongly recommends mitigation when levels exceed 4.0 pCi/L. In TN, Tennessee requires sellers to complete a Residential Property Condition Disclosure covering known defects and hazards.. Many mortgage lenders and home insurers in Zone 1 areas require or encourage radon testing.
Yes. In TN, Tennessee requires sellers to complete a Residential Property Condition Disclosure covering known defects and hazards.. Sellers who fail to disclose known radon test results may face legal liability after the sale closes.
In TN, concealing known radon levels violates state disclosure requirements. Buyers can pursue legal remedies including rescission of the sale or damages for the cost of mitigation (approximately $1895 in Moore County).
Based on local labor rates and material costs, radon mitigation in Moore County typically costs between $1340 and $2450, with an average of $1895. The final cost depends on your foundation type (basement, crawl space, or slab) and the complexity of the installation.
This is negotiable. In most real estate transactions, the buyer requests a Seller Credit (closing credit) to cover the cost of mitigation. The buyer then hires their own contractor after closing. In TN, radon disclosure is required during property sales.
A standard sub-slab depressurization system is typically installed in 4-8 hours by a certified professional. The system begins reducing radon levels immediately, and a post-mitigation test is usually conducted 24-48 hours after installation.
The most common and effective system is Active Sub-slab Depressurization (ASD). A pipe is inserted through or below the foundation slab, and a small fan continuously draws radon gas from beneath the home and exhausts it above the roofline, where it safely disperses.
Yes. A properly mitigated home with documentation removes a major buyer objection. In Moore County, where the average mitigation costs $1895, the return on investment is highly favorable — especially in Zone 1 areas where buyers actively screen for radon.
While DIY radon mitigation is technically possible, it is strongly discouraged. Improper installation can fail to reduce radon levels or even increase them. In TN, Tennessee does not require specific radon licensing.. The EPA recommends hiring a certified professional.
Related Radon Resources for Moore County
More About Radon in Moore County
Explore Radon Mitigation Costs in Nearby TN Counties
Official State Resource
Tennessee radon program and rules
Use the state program link to verify local radon guidance, disclosure language, and contractor credential expectations before you act on an estimate.
Disclosure rule tracked
Tennessee requires sellers to complete a Residential Property Condition Disclosure covering known defects and hazards.
Credential note
Tennessee does not require specific radon licensing.
Sources & Methodology
The radon mitigation cost estimates presented on this page are dynamically calculated using baseline national material averages combined with localized labor multipliers for Moore County.
Important Disclaimers
- Health & Safety: Information on this site is for educational purposes and is not medical advice. For health concerns, consult qualified professionals.
- Estimates: Estimates are general ranges based on typical projects. Actual quotes vary by home conditions and local labor.
- Zone Data: Radon zone classifications describe regional potential for elevated indoor radon. They do not predict the radon level in a specific home. Testing is recommended for all homes.
Data Sources
- US Environmental Protection Agency (EPA) - Action Level
- EPA Map of Radon Zones
- National contractor cost guides and local labor indices.
Content review: Source-level retrieval dates
Editorial and Data Transparency
- Author
- RadonVerdict Data Team (Public Data and Cost Modeling)
- Content Review
- Source-level dates shown below
- Data Retrieved At
- 2026-02-24
Primary Sources
- US Census Bureau, 2018-2022 American Community Survey 5-Year Estimates (retrieved 2026-02-24)