Radon Levels & Zone Map in Newton County, AR
Direct Answer for basement and lowest-level tests: Newton County has a lower countywide signal, but that does not clear an individual home. A real test still beats the map.
Low county risk is not a home-level clear signal
Do not let a Zone 3 label talk you out of the first test. House-by-house differences still matter.
Lower countywide map signal, but house-by-house spikes still happen.
2.0-3.9 pCi/L usually means retest or track. 4.0+ is where EPA action and quote planning start to matter.
Low zone is not a free pass. Use a kit before you rule radon out.
Measured Radon Data
Newton County evidence before the next step
Newton County, AR has more than the EPA map: CDC Tracking Network exposes 1 reported tests, 3.0 pCi/L county average, 3.0 pCi/L median, 0.0% of reported tests at or above 4.0 pCi/L, and 3.0 pCi/L high-end signal for 2008-2017.
Source window
2008-2017
Processed verdict
Elevated measured burden
Solid confidence - 81/100
Primary result
3.0 pCi/L
74th percentile in-state
4.0+ signal
0.0%
55th percentile in-state
High-end signal
3.0 pCi/L
47th percentile in-state
County-specific verdict
Newton County is elevated enough that map-reading should turn into a home test.
Newton County is a priority-test case because 3.0 pCi/L average, 3.0 pCi/L median, and 0.0% of reported tests at or above 4.0. In-state rank: 74th percentile for average, and 55th percentile for 4.0+ share. The county signal is strong enough to justify testing or retesting before cost decisions.
Real-estate use
Buyer or seller use: ask for a fresh lowest-level test before inspection deadlines, tie any 4.0+ result to a contractor quote, and do not negotiate from the county signal alone.
Newton County has enough measured elevation that buyers and owners should not stop at the county signal; confirm the home and price mitigation if the result crosses 4.0.
Choose Next StepElevated-intent answer
Are radon levels elevated in Newton County?
Newton County has enough measured elevation that the answer should not stop at the EPA zone. 0.0% of reported tests at or above 4.0 pCi/L, 3.0 pCi/L primary measured result, and 3.0 pCi/L high-end signal makes a first test or confirmatory retest the right next step before cost decisions.
Pick the situation that matches you
You should not need to read the whole guide before clicking one of these. Start with the lane that matches your current stage, then come back for the deeper reference only if you still need it.
Jump into a prefilled Newton County action plan based on the result you already have, instead of starting from a generic cost page.
I have not tested yet
Do not price mitigation blind. Get the first number, then decide whether you need monitoring, quotes, or nothing at all.
My result is 2.0-3.9
Usually retest or track first. If the reading keeps showing up, use the local action plan to decide whether pricing makes sense.
My result is 4.0+
This is the EPA action line. Use the local cost page before calling contractors so you know the likely scope, timing, and budget.
I am buying or selling
Turn the reading into a credit or repair number before negotiation starts. This is the faster path than arguing from a generic article.
Already tested once and just want to watch the number trend?
View Airthings Corentium HomeAffiliate disclosure: we may earn a commission if you buy through these links.
County Evidence Snapshot
Newton County testing context
Newton County has a lower predicted countywide zone signal, so direct testing matters more than the map label.
EPA map signal
Zone 3
County-level predicted indoor screening range, not a home-level test result.
Housing base
4,124
12th percentile among 75 AR counties with data.
Older housing share
50.0%
48th percentile in-state; older homes often need clearer test placement decisions.
Median home value
$160,500
Used as context for whether mitigation is a small maintenance item or a negotiation issue.
Measured Radon Data
CDC Environmental Public Health Tracking Network Radon Tests from Labs
2008-2017
Average result
3.0 pCi/L
At or above 4.0
0.0%
Maximum reported
3.0 pCi/L
10-year tested
1
CDC county summaries are based on national radon testing laboratories and participating state feeds; they are not a statistically designed survey of every home.
RadonVerdict Processed Verdict
Elevated measured burden
Primary result rank
74th percentile
3.0 pCi/L
4.0+ rank
55th percentile
0.0% at or above 4.0
High-end rank
47th percentile
3.0 pCi/L
Test volume rank
36th percentile
1 over 10 years
How to use this county data
Data source
National tracking data
CDC Tracking provides comparable county-level measurement fields; state-specific sources still outrank it when they expose stable county tables.
What the numbers show
Fuller county picture
This is the most useful setup: county average, 4.0+ share, high-end readings, and 1 reported tests/properties can be read together instead of relying on one number.
Nearby comparison
Nearby comparison: Closest counties by share of tests at or above 4.0 pCi/L: Montgomery County (0.0%) is just lower, and Ouachita County (0.0%) is just higher.
How this helps
Use this to decide whether the county signal is strong enough to justify testing or retesting before cost decisions.
What the data says
Newton County, AR is measurement-backed for 2008-2017. The measured average is 3.0 pCi/L, and 0.0% of reported results are at or above 4.0 pCi/L. The high-end signal reaches 3.0 pCi/L.
Newton County, AR sits at the 74th percentile for measured average, 55th percentile for 4.0+ share, 47th percentile for high-end readings, and 36th percentile for test volume among 75 measured counties in the state. Closest counties by county average: Independence County (2.7 pCi/L) is just lower, and Randolph County (3.2 pCi/L) is just higher.
What to do with it
Newton County has enough measured elevation that buyers and owners should not stop at the county signal; confirm the home and price mitigation if the result crosses 4.0.
Retest trigger: a 2.0-3.9 pCi/L home result should be confirmed here because 3.0 pCi/L average, 3.0 pCi/L median, and 0.0% of reported tests at or above 4.0 keeps the county from being a dismiss-it signal.
Solid confidence (81/100) from CDC Tracking Network based on about 1 reported tests/properties plus comparable county-level measurement fields.
No reading yet
No reading yet: run a short-term test now, then confirm or price mitigation quickly if the result is elevated.
2.0-3.9 result
2.0-3.9 pCi/L: retest or track longer-term rather than dismissing the result, because the county distribution has meaningful elevated readings.
4.0+ result
4.0+ pCi/L: use the result for mitigation quotes, repair scope, or seller-credit negotiation; the county signal is no longer the deciding input.
Source hierarchy: CDC Tracking Network is used for this county, with EPA zone and Census housing data kept as supporting context. CDC Tracking provides comparable county-level measurement fields; state-specific sources still outrank it when they expose stable county tables.
Direct Answer
What radon risk level should homeowners assume in Newton County?
Newton County is currently categorized as EPA Zone 3 (Lower Predicted Average Risk). Testing is still recommended because home-level variance can be high.
| Evidence | Value |
|---|---|
| Area | Newton County, AR |
| EPA Zone | Zone 3 |
| Primary Recommendation | Perform direct radon testing in the lowest livable level |
Your Radon Reading
Enter your home's measured level; the starting value is only a planning example until you have your own result.
Lower Concern Range
Your reading is below the common action reference levels. Both the EPA (4.0) and WHO (2.7) thresholds are not exceeded. Mitigation is usually not the next immediate step after a confirmed low result. If you have never tested your home, start with a short-term kit first. If this is already a confirmed low reading, a digital monitor can help you keep an eye on seasonal changes.
Understanding Radon Levels: Complete Reference
Below 2.0 pCi/L - Lower Concern, Keep Testing
Below both the EPA (4.0) and WHO (2.7) action reference levels. This usually means mitigation is not the next immediate step after a confirmed result. The average outdoor radon level is approximately 0.4 pCi/L, and there is no known risk-free indoor level. Periodic testing is still recommended because levels can change over time due to seasonal variations, changes in home ventilation, or foundation settling.
-4.0
2.0 - 4.0 pCi/L - Elevated, Consider Action
Exceeds the World Health Organization's reference level of 2.7 pCi/L but falls below the US EPA action threshold. The EPA states that homeowners should "consider fixing" homes in this range, especially if the home has a basement used as living space, if children are present, or in connection with a real estate transaction. Practical next step: run a confirmatory long-term test, then compare mitigation quotes if levels remain elevated.
-8.0
4.0 - 8.0 pCi/L - Action Recommended
Exceeds the EPA action level of 4.0 pCi/L. The EPA and Surgeon General strongly recommend mitigation within a few months. At this level, prioritize confirmatory testing and contractor planning. Standard sub-slab depressurization systems typically reduce indoor levels by 80-99%.
Above 8.0 pCi/L - Urgent Action Required
At these levels, the EPA recommends expedited mitigation - ideally within weeks, not months. Occupants should minimize time in lower-level rooms until the system is installed. Use a certified mitigator and request priority scheduling to shorten high-exposure time. Many mitigators offer priority scheduling for homes above 8.0 pCi/L.
Why Radon is Still Relevant in Newton County
Newton County is classified as EPA Zone 3, with a lower predicted indoor screening range below 2.0 pCi/L. This does not mean radon is absent - it means the countywide map signal is low.
The EPA has documented elevated radon readings in every state and in homes in every zone classification. Local geological anomalies - pockets of granite, shale intrusions, or fractured bedrock - can create localized high-radon areas even within an otherwise low-risk county.
The Surgeon General and EPA recommend testing all homes, regardless of geographic zone. A simple short-term test kit ($15-$30) provides results within a few days and can give you peace of mind.
Radon & Health: What the Science Says
lung cancer
from radon
4.0 pCi/L
Radon is a Class A carcinogen - the same classification as asbestos and tobacco smoke. The National Academy of Sciences estimates that radon causes approximately 21,000 lung cancer deaths annually in the United States, making it the leading environmental cause of cancer death.
Unlike smoking, radon exposure is involuntary and often invisible. There is no safe level of radon - risk increases linearly with exposure. The good news: radon mitigation systems are highly effective, typically reducing indoor levels by 80-99% within hours of activation.
Source: US Environmental Protection Agency, "A Citizen's Guide to Radon" (EPA 402/K-12/002). National Academy of Sciences, Biological Effects of Ionizing Radiation (BEIR VI) Report, 1999.
Step 1: Test Your Home
Testing is the only way to know your home's radon level. Zone data tells you the regional risk, but your home could be significantly higher or lower than the countywide pattern. For most homeowners, the right first purchase is a low-cost short-term test kit.
A digital monitor is a better fit after your first result, for seasonal re-checks, or to keep tracking levels after mitigation.
View Airthings Corentium HomeAs an Amazon Associate, RadonVerdict earns from qualifying purchases.
Already Know Your Level?
If your test shows 4.0 pCi/L or higher, get an itemized cost estimate specific to Newton County - including regional labor rates and permit requirements.
Get Mitigation Cost Estimate ->AR Radon Regulations
Arkansas does not have specific radon disclosure requirements in real estate transactions.
Arkansas does not require state licensing for radon professionals.
How to Test for Radon in Newton County
Buy a Test Kit
Purchase a short-term charcoal test kit online or from a local hardware store. Cost: $15-$30. Place it in the lowest livable level of your home.
Wait 2-7 Days
Keep doors and windows closed (except normal entry/exit) during the test period. Avoid running whole-house fans. Mail the kit to the lab provided.
Read Your Results
If results are below 4.0 pCi/L, re-test every 2 years or use a monitor for ongoing tracking. If above 4.0, use our cost calculator to see mitigation options.
Related Radon Resources for Newton County
Explore Other AR Counties
Official State Resource
Arkansas radon program and rules
Use the state program link to verify local radon guidance, disclosure language, and contractor credential expectations before you act on an estimate.
Disclosure note
Arkansas does not have specific radon disclosure requirements in real estate transactions.
Credential note
Arkansas does not require state licensing for radon professionals.
Sources & Methodology
Radon zone classifications for Newton County are sourced from the EPA's Map of Radon Zones, which uses geological surveys, indoor radon measurements, and soil permeability data to assign each county a risk tier.
Disclaimer: Zone data represents county-level screening ranges and cannot predict the radon level in any specific home. Testing is the only reliable method to determine your home's radon concentration. This content is for informational purposes and is not medical advice.
Content review: Source-level retrieval dates
Editorial and Data Transparency
- Author
- RadonVerdict Data Team (Public Data and Cost Modeling)
- Content Review
- Source-level dates shown below
- Data Retrieved At
- 2026-02-24
Primary Sources
- EPA Map of Radon Zones (retrieved 2026-02-21)
- EPA A Citizen's Guide to Radon (retrieved 2026-05-05)
- CDC Environmental Public Health Tracking - Radon Testing (retrieved 2026-05-05)
- Official AR radon program
- US Census Bureau, 2018-2022 American Community Survey 5-Year Estimates (retrieved 2026-02-24)