Radon Levels & Zone Map in Sioux County, IA
Direct Answer for basement and lowest-level tests: Sioux County is a strong county-level radon signal. You still need a home test, but this is not a county where skipping the first test makes sense.
Do not guess in a higher-risk county
Most users should either get a first test or move a 4.0+ result straight into mitigation pricing.
Higher countywide chance of 4.0+ readings.
2.0-3.9 pCi/L usually means retest or track. 4.0+ is where EPA action and quote planning start to matter.
No reading: test now. Reading at 4.0+: move into mitigation planning.
Measured Radon Data
Sioux County evidence before the next step
Sioux County, IA has more than the EPA map: Iowa HHS exposes 6.8 pCi/L county average, and 6.8 pCi/L median for current dashboard export.
Source window
current dashboard export
Processed verdict
High measured burden
Directional confidence - 62/100
Primary result
6.8 pCi/L
89th percentile in-state
4.0+ signal
Not available
n/a in-state
High-end signal
Not available
n/a in-state
County-specific verdict
Sioux County crosses the action threshold in the official county data.
Sioux County is a test-now case because 6.8 pCi/L average, and 6.8 pCi/L median. In-state rank: 89th percentile for average. No reading means get the first number; a 4.0+ home result should move straight to mitigation quotes or seller-credit math.
Real-estate use
Buyer or seller use: ask for a fresh lowest-level test before inspection deadlines, tie any 4.0+ result to a contractor quote, and do not negotiate from the county signal alone.
Sioux County should be treated as a county where a first test is urgent and a 4.0+ result should move directly into mitigation pricing or seller-credit math.
Choose Next StepHigh-risk intent answer
Is radon bad in Sioux County?
Sioux County should be treated as a high-priority testing market because 6.8 pCi/L primary measured result in Iowa HHS data. A missing home reading means test now; a 4.0+ result means mitigation pricing or seller-credit math should start.
Pick the situation that matches you
You should not need to read the whole guide before clicking one of these. Start with the lane that matches your current stage, then come back for the deeper reference only if you still need it.
Jump into a prefilled Sioux County action plan based on the result you already have, instead of starting from a generic cost page.
I have not tested yet
Do not price mitigation blind. Get the first number, then decide whether you need monitoring, quotes, or nothing at all.
My result is 2.0-3.9
Usually retest or track first. If the reading keeps showing up, use the local action plan to decide whether pricing makes sense.
My result is 4.0+
This is the EPA action line. Use the local cost page before calling contractors so you know the likely scope, timing, and budget.
I am buying or selling
Turn the reading into a credit or repair number before negotiation starts. This is the faster path than arguing from a generic article.
Already tested once and just want to watch the number trend?
View Airthings Corentium HomeAffiliate disclosure: we may earn a commission if you buy through these links.
County Evidence Snapshot
Sioux County testing context
Sioux County is a higher-priority testing county because the EPA zone signal is high and the page now ties that signal to local housing context.
EPA map signal
Zone 1
County-level predicted indoor screening range, not a home-level test result.
Housing base
13,046
78th percentile among 99 IA counties with data.
Older housing share
36.3%
84th percentile in-state; older homes often need clearer test placement decisions.
Median home value
$220,700
Used as context for whether mitigation is a small maintenance item or a negotiation issue.
Measured Radon Data
Iowa HHS Radon Dashboard County Metrics
current dashboard export
Median result
6.8 pCi/L
At or above 4.0
Not available
High-end signal
Not available
Avg. tests/year
Not available
Iowa HHS/IDPH publishes county median radon values through a public Tableau CSV export. RadonVerdict stores the median county test result as a county context signal; it is not a prediction for any individual home, and Iowa HHS still recommends testing because high levels can be found in any type of home.
RadonVerdict Processed Verdict
High measured burden
Primary result rank
89th percentile
6.8 pCi/L
4.0+ rank
n/a
Not available at or above 4.0
High-end rank
n/a
Not available
Test volume rank
n/a
Not available
How to use this county data
Data source
Median county result
Iowa values come from the HHS/IDPH county metrics dashboard export. The median is useful for ranking local testing burden, but it still cannot predict a specific home's reading.
What the numbers show
Typical county result
This source is useful for a typical county result and local ranking, but it does not show how many homes cross 4.0 pCi/L.
Nearby comparison
Nearby comparison: Closest counties by county average: Hancock County (6.6 pCi/L) is just lower, and Lyon County (6.9 pCi/L) is just higher.
How this helps
Use this to decide how urgently to test, retest, or plan mitigation after a 4.0+ result.
What the data says
Sioux County, IA is measurement-backed for current dashboard export. The measured average is 6.8 pCi/L.
Sioux County, IA sits at the 89th percentile for measured average, n/a for 4.0+ share, n/a for high-end readings, and n/a for test volume among 99 measured counties in the state. Closest counties by county average: Hancock County (6.6 pCi/L) is just lower, and Lyon County (6.9 pCi/L) is just higher.
What to do with it
Sioux County should be treated as a county where a first test is urgent and a 4.0+ result should move directly into mitigation pricing or seller-credit math.
Retest trigger: a 2.0-3.9 pCi/L home result should be confirmed here because 6.8 pCi/L average, and 6.8 pCi/L median keeps the county from being a dismiss-it signal.
Directional confidence (62/100) from Iowa HHS plus comparable county-level measurement fields.
No reading yet
No reading yet: run a short-term test now, then confirm or price mitigation quickly if the result is elevated.
2.0-3.9 result
2.0-3.9 pCi/L: retest or track longer-term rather than dismissing the result, because the county distribution has meaningful elevated readings.
4.0+ result
4.0+ pCi/L: use the result for mitigation quotes, repair scope, or seller-credit negotiation; the county signal is no longer the deciding input.
Source hierarchy: Iowa HHS is used for this county, with EPA zone and Census housing data kept as supporting context. Iowa values come from the HHS/IDPH county metrics dashboard export. The median is useful for ranking local testing burden, but it still cannot predict a specific home's reading.
Direct Answer
What radon risk level should homeowners assume in Sioux County?
Sioux County is currently categorized as EPA Zone 1 (High Risk). Prioritize testing now and prepare for possible mitigation.
| Evidence | Value |
|---|---|
| Area | Sioux County, IA |
| EPA Zone | Zone 1 |
| Primary Recommendation | Perform direct radon testing in the lowest livable level |
Your Radon Reading
Enter your home's measured level; the starting value is only a planning example until you have your own result.
Warning: Action Required - EPA Threshold Exceeded
At 5.5 pCi/L, this reading is above the EPA action level. Prompt mitigation planning is recommended after confirmatory testing.
Typical mitigation systems reduce radon by 80-99%. See your itemized cost estimate below.
Understanding Radon Levels: Complete Reference
Below 2.0 pCi/L - Lower Concern, Keep Testing
Below both the EPA (4.0) and WHO (2.7) action reference levels. This usually means mitigation is not the next immediate step after a confirmed result. The average outdoor radon level is approximately 0.4 pCi/L, and there is no known risk-free indoor level. Periodic testing is still recommended because levels can change over time due to seasonal variations, changes in home ventilation, or foundation settling.
-4.0
2.0 - 4.0 pCi/L - Elevated, Consider Action
Exceeds the World Health Organization's reference level of 2.7 pCi/L but falls below the US EPA action threshold. The EPA states that homeowners should "consider fixing" homes in this range, especially if the home has a basement used as living space, if children are present, or in connection with a real estate transaction. Practical next step: run a confirmatory long-term test, then compare mitigation quotes if levels remain elevated.
-8.0
4.0 - 8.0 pCi/L - Action Recommended
Exceeds the EPA action level of 4.0 pCi/L. The EPA and Surgeon General strongly recommend mitigation within a few months. At this level, prioritize confirmatory testing and contractor planning. Standard sub-slab depressurization systems typically reduce indoor levels by 80-99%.
Above 8.0 pCi/L - Urgent Action Required
At these levels, the EPA recommends expedited mitigation - ideally within weeks, not months. Occupants should minimize time in lower-level rooms until the system is installed. Use a certified mitigator and request priority scheduling to shorten high-exposure time. Many mitigators offer priority scheduling for homes above 8.0 pCi/L.
Why Radon is a Serious Concern in Sioux County
Sioux County sits in a geological region with elevated uranium concentrations in the underlying bedrock and soil. As uranium naturally decays, it produces radium, which further decays into radon gas. This gas migrates upward through soil and enters homes through foundation cracks, gaps around pipes, and sump pits.
In Zone 1 counties like Sioux, the EPA predicts indoor screening levels are commonly above 4.0 pCi/L. Individual homes can still vary dramatically - even neighboring houses can differ by a factor of 10 or more. This is why every home needs its own test, regardless of what a neighbor's reading shows.
Factors that amplify radon entry include: basement foundations (more soil contact area), granitic or shale bedrock, tight energy-efficient construction (less natural ventilation), and negative indoor air pressure from HVAC systems, exhaust fans, and dryers.
Radon & Health: What the Science Says
lung cancer
from radon
4.0 pCi/L
Radon is a Class A carcinogen - the same classification as asbestos and tobacco smoke. The National Academy of Sciences estimates that radon causes approximately 21,000 lung cancer deaths annually in the United States, making it the leading environmental cause of cancer death.
Unlike smoking, radon exposure is involuntary and often invisible. There is no safe level of radon - risk increases linearly with exposure. The good news: radon mitigation systems are highly effective, typically reducing indoor levels by 80-99% within hours of activation.
Source: US Environmental Protection Agency, "A Citizen's Guide to Radon" (EPA 402/K-12/002). National Academy of Sciences, Biological Effects of Ionizing Radiation (BEIR VI) Report, 1999.
Step 1: Test Your Home
Testing is the only way to know your home's radon level. Zone data tells you the regional risk, but your home could be significantly higher or lower than the countywide pattern. For most homeowners, the right first purchase is a low-cost short-term test kit.
A digital monitor is a better fit after your first result, for seasonal re-checks, or to keep tracking levels after mitigation.
View Airthings Corentium HomeAs an Amazon Associate, RadonVerdict earns from qualifying purchases.
Already Know Your Level?
If your test shows 4.0 pCi/L or higher, get an itemized cost estimate specific to Sioux County - including regional labor rates and permit requirements.
Get Mitigation Cost Estimate ->IA Radon Regulations
Iowa requires radon testing results to be disclosed during residential property sales. Iowa has some of the highest average radon levels in the US.
Iowa requires certification for radon measurement and mitigation professionals.
How to Test for Radon in Sioux County
Buy a Test Kit
Purchase a short-term charcoal test kit online or from a local hardware store. Cost: $15-$30. Place it in the lowest livable level of your home.
Wait 2-7 Days
Keep doors and windows closed (except normal entry/exit) during the test period. Avoid running whole-house fans. Mail the kit to the lab provided.
Read Your Results
If results are below 4.0 pCi/L, re-test every 2 years or use a monitor for ongoing tracking. If above 4.0, use our cost calculator to see mitigation options.
Related Radon Resources for Sioux County
Explore Other IA Counties
Official State Resource
Iowa radon program and rules
Use the state program link to verify local radon guidance, disclosure language, and contractor credential expectations before you act on an estimate.
Disclosure rule tracked
Iowa requires radon testing results to be disclosed during residential property sales. Iowa has some of the highest average radon levels in the US.
State licensing required
Iowa requires certification for radon measurement and mitigation professionals.
Sources & Methodology
Radon zone classifications for Sioux County are sourced from the EPA's Map of Radon Zones, which uses geological surveys, indoor radon measurements, and soil permeability data to assign each county a risk tier.
Disclaimer: Zone data represents county-level screening ranges and cannot predict the radon level in any specific home. Testing is the only reliable method to determine your home's radon concentration. This content is for informational purposes and is not medical advice.
Content review: Source-level retrieval dates
Editorial and Data Transparency
- Author
- RadonVerdict Data Team (Public Data and Cost Modeling)
- Content Review
- Source-level dates shown below
- Data Retrieved At
- 2026-02-24
Primary Sources
- EPA Map of Radon Zones (retrieved 2026-02-21)
- EPA A Citizen's Guide to Radon (retrieved 2026-05-05)
- CDC Environmental Public Health Tracking - Radon Testing (retrieved 2026-05-05)
- Iowa HHS Radon Dashboard County Metrics (retrieved 2026-05-06)
- Official IA radon program
- US Census Bureau, 2018-2022 American Community Survey 5-Year Estimates (retrieved 2026-02-24)