Radon Levels & Zone Map in Blair County, PA
Direct Answer for basement and lowest-level tests: Blair County is a strong county-level radon signal. You still need a home test, but this is not a county where skipping the first test makes sense.
Do not guess in a higher-risk county
Most users should either get a first test or move a 4.0+ result straight into mitigation pricing.
Higher countywide chance of 4.0+ readings.
2.0-3.9 pCi/L usually means retest or track. 4.0+ is where EPA action and quote planning start to matter.
No reading: test now. Reading at 4.0+: move into mitigation planning.
Measured Radon Data
Blair County evidence before the next step
Blair County, PA has more than the EPA map: PA DEP Radon Division exposes 13,696 reported tests, 6.7 pCi/L county average, and 909.0 pCi/L high-end signal for 1990-2025.
Source window
1990-2025
Processed verdict
High measured burden
Solid confidence - 77/100
Primary result
6.7 pCi/L
34th percentile in-state
4.0+ signal
Not available
n/a in-state
High-end signal
909.0 pCi/L
79th percentile in-state
County-specific verdict
Blair County crosses the action threshold in the official county data.
Blair County is a test-now case because 6.7 pCi/L average. In-state rank: 34th percentile for average. No reading means get the first number; a 4.0+ home result should move straight to mitigation quotes or seller-credit math.
Real-estate use
Buyer or seller use: ask for a fresh lowest-level test before inspection deadlines, tie any 4.0+ result to a contractor quote, and do not negotiate from the county signal alone.
Blair County should be treated as a county where a first test is urgent and a 4.0+ result should move directly into mitigation pricing or seller-credit math.
Choose Next StepHigh-risk intent answer
Is radon bad in Blair County?
Blair County should be treated as a high-priority testing market because 6.7 pCi/L primary measured result, and 909.0 pCi/L high-end signal in PA DEP Radon Division data. A missing home reading means test now; a 4.0+ result means mitigation pricing or seller-credit math should start.
Pick the situation that matches you
You should not need to read the whole guide before clicking one of these. Start with the lane that matches your current stage, then come back for the deeper reference only if you still need it.
Jump into a prefilled Blair County action plan based on the result you already have, instead of starting from a generic cost page.
I have not tested yet
Do not price mitigation blind. Get the first number, then decide whether you need monitoring, quotes, or nothing at all.
My result is 2.0-3.9
Usually retest or track first. If the reading keeps showing up, use the local action plan to decide whether pricing makes sense.
My result is 4.0+
This is the EPA action line. Use the local cost page before calling contractors so you know the likely scope, timing, and budget.
I am buying or selling
Turn the reading into a credit or repair number before negotiation starts. This is the faster path than arguing from a generic article.
Already tested once and just want to watch the number trend?
View Airthings Corentium HomeAffiliate disclosure: we may earn a commission if you buy through these links.
County Evidence Snapshot
Blair County testing context
Blair County is a higher-priority testing county because the EPA zone signal is high and the page now ties that signal to local housing context.
EPA map signal
Zone 1
County-level predicted indoor screening range, not a home-level test result.
Housing base
55,808
60th percentile among 67 PA counties with data.
Older housing share
24.5%
21th percentile in-state; older homes often need clearer test placement decisions.
Median home value
$149,300
Used as context for whether mitigation is a small maintenance item or a negotiation issue.
Measured Radon Data
Pennsylvania DEP Radon Test Data by ZIP Code
1990-2025
Basement average
6.7 pCi/L
At or above 4.0
Not available
Maximum reported
909.0 pCi/L
Reported tests
13,696
PA DEP Radon Division ZIP reports are based on short-term closed-house radon tests submitted by certified radon laboratories and testers from January 1990 through December 2025. PA DEP does not report an average when a ZIP has fewer than 30 tests. RadonVerdict rolls ZIP rows up to primary counties and treats the basement average as the primary local signal while preserving first-floor context.
RadonVerdict Processed Verdict
High measured burden
Primary result rank
34th percentile
6.7 pCi/L
4.0+ rank
n/a
Not available at or above 4.0
High-end rank
79th percentile
909.0 pCi/L
Test volume rank
64th percentile
13,696 reported tests
How to use this county data
Data source
Basement and first-floor test data
Pennsylvania values are RadonVerdict county rollups from PA DEP ZIP reports, with basement readings treated as the primary local signal and first-floor readings preserved as a separate floor context.
What the numbers show
Basement-focused results
PA separates basement and first-floor tests. RadonVerdict treats basement results as the main signal for mitigation planning and keeps first-floor results as context.
Nearby comparison
Nearby comparison: Closest counties by county average: Tioga County (6.4 pCi/L) is just lower, and Cambria County (6.8 pCi/L) is just higher.
How this helps
Use this for basement-level test planning and 4.0+ mitigation or seller-credit decisions in Blair County.
What the data says
Blair County, PA is measurement-backed for 1990-2025. The measured average is 6.7 pCi/L. The high-end signal reaches 909.0 pCi/L.
Blair County, PA sits at the 34th percentile for measured average, n/a for 4.0+ share, 79th percentile for high-end readings, and 64th percentile for test volume among 67 measured counties in the state. Closest counties by county average: Tioga County (6.4 pCi/L) is just lower, and Cambria County (6.8 pCi/L) is just higher.
What to do with it
Blair County should be treated as a county where a first test is urgent and a 4.0+ result should move directly into mitigation pricing or seller-credit math.
Retest trigger: a 2.0-3.9 pCi/L home result should be confirmed here because 6.7 pCi/L average keeps the county from being a dismiss-it signal.
Solid confidence (77/100) from PA DEP Radon Division based on about 13,696 reported tests/properties plus comparable county-level measurement fields.
No reading yet
No reading yet: run a short-term test now, then confirm or price mitigation quickly if the result is elevated.
2.0-3.9 result
2.0-3.9 pCi/L: retest or track longer-term rather than dismissing the result, because the county distribution has meaningful elevated readings.
4.0+ result
4.0+ pCi/L: use the result for mitigation quotes, repair scope, or seller-credit negotiation; the county signal is no longer the deciding input.
Source hierarchy: PA DEP Radon Division is used for this county, with EPA zone and Census housing data kept as supporting context. Pennsylvania values are RadonVerdict county rollups from PA DEP ZIP reports, with basement readings treated as the primary local signal and first-floor readings preserved as a separate floor context.
Direct Answer
What radon risk level should homeowners assume in Blair County?
Blair County is currently categorized as EPA Zone 1 (High Risk). Prioritize testing now and prepare for possible mitigation.
| Evidence | Value |
|---|---|
| Area | Blair County, PA |
| EPA Zone | Zone 1 |
| Primary Recommendation | Perform direct radon testing in the lowest livable level |
Your Radon Reading
Enter your home's measured level; the starting value is only a planning example until you have your own result.
Warning: Action Required - EPA Threshold Exceeded
At 5.5 pCi/L, this reading is above the EPA action level. Prompt mitigation planning is recommended after confirmatory testing.
Typical mitigation systems reduce radon by 80-99%. See your itemized cost estimate below.
Understanding Radon Levels: Complete Reference
Below 2.0 pCi/L - Lower Concern, Keep Testing
Below both the EPA (4.0) and WHO (2.7) action reference levels. This usually means mitigation is not the next immediate step after a confirmed result. The average outdoor radon level is approximately 0.4 pCi/L, and there is no known risk-free indoor level. Periodic testing is still recommended because levels can change over time due to seasonal variations, changes in home ventilation, or foundation settling.
-4.0
2.0 - 4.0 pCi/L - Elevated, Consider Action
Exceeds the World Health Organization's reference level of 2.7 pCi/L but falls below the US EPA action threshold. The EPA states that homeowners should "consider fixing" homes in this range, especially if the home has a basement used as living space, if children are present, or in connection with a real estate transaction. Practical next step: run a confirmatory long-term test, then compare mitigation quotes if levels remain elevated.
-8.0
4.0 - 8.0 pCi/L - Action Recommended
Exceeds the EPA action level of 4.0 pCi/L. The EPA and Surgeon General strongly recommend mitigation within a few months. At this level, prioritize confirmatory testing and contractor planning. Standard sub-slab depressurization systems typically reduce indoor levels by 80-99%.
Above 8.0 pCi/L - Urgent Action Required
At these levels, the EPA recommends expedited mitigation - ideally within weeks, not months. Occupants should minimize time in lower-level rooms until the system is installed. Use a certified mitigator and request priority scheduling to shorten high-exposure time. Many mitigators offer priority scheduling for homes above 8.0 pCi/L.
Why Radon is a Serious Concern in Blair County
Blair County sits in a geological region with elevated uranium concentrations in the underlying bedrock and soil. As uranium naturally decays, it produces radium, which further decays into radon gas. This gas migrates upward through soil and enters homes through foundation cracks, gaps around pipes, and sump pits.
In Zone 1 counties like Blair, the EPA predicts indoor screening levels are commonly above 4.0 pCi/L. Individual homes can still vary dramatically - even neighboring houses can differ by a factor of 10 or more. This is why every home needs its own test, regardless of what a neighbor's reading shows.
Factors that amplify radon entry include: basement foundations (more soil contact area), granitic or shale bedrock, tight energy-efficient construction (less natural ventilation), and negative indoor air pressure from HVAC systems, exhaust fans, and dryers.
Radon & Health: What the Science Says
lung cancer
from radon
4.0 pCi/L
Radon is a Class A carcinogen - the same classification as asbestos and tobacco smoke. The National Academy of Sciences estimates that radon causes approximately 21,000 lung cancer deaths annually in the United States, making it the leading environmental cause of cancer death.
Unlike smoking, radon exposure is involuntary and often invisible. There is no safe level of radon - risk increases linearly with exposure. The good news: radon mitigation systems are highly effective, typically reducing indoor levels by 80-99% within hours of activation.
Source: US Environmental Protection Agency, "A Citizen's Guide to Radon" (EPA 402/K-12/002). National Academy of Sciences, Biological Effects of Ionizing Radiation (BEIR VI) Report, 1999.
Step 1: Test Your Home
Testing is the only way to know your home's radon level. Zone data tells you the regional risk, but your home could be significantly higher or lower than the countywide pattern. For most homeowners, the right first purchase is a low-cost short-term test kit.
A digital monitor is a better fit after your first result, for seasonal re-checks, or to keep tracking levels after mitigation.
View Airthings Corentium HomeAs an Amazon Associate, RadonVerdict earns from qualifying purchases.
Already Know Your Level?
If your test shows 4.0 pCi/L or higher, get an itemized cost estimate specific to Blair County - including regional labor rates and permit requirements.
Get Mitigation Cost Estimate ->PA Radon Regulations
Pennsylvania requires radon disclosure through the Seller's Property Disclosure Statement. The PA DEP also provides radon-specific guidance for real estate transactions.
Pennsylvania requires certification for radon testing and mitigation professionals through the PA DEP.
How to Test for Radon in Blair County
Buy a Test Kit
Purchase a short-term charcoal test kit online or from a local hardware store. Cost: $15-$30. Place it in the lowest livable level of your home.
Wait 2-7 Days
Keep doors and windows closed (except normal entry/exit) during the test period. Avoid running whole-house fans. Mail the kit to the lab provided.
Read Your Results
If results are below 4.0 pCi/L, re-test every 2 years or use a monitor for ongoing tracking. If above 4.0, use our cost calculator to see mitigation options.
Related Radon Resources for Blair County
Explore Other PA Counties
Official State Resource
Pennsylvania radon program and rules
Use the state program link to verify local radon guidance, disclosure language, and contractor credential expectations before you act on an estimate.
Disclosure rule tracked
Pennsylvania requires radon disclosure through the Seller's Property Disclosure Statement. The PA DEP also provides radon-specific guidance for real estate transactions.
State licensing required
Pennsylvania requires certification for radon testing and mitigation professionals through the PA DEP.
Sources & Methodology
Radon zone classifications for Blair County are sourced from the EPA's Map of Radon Zones, which uses geological surveys, indoor radon measurements, and soil permeability data to assign each county a risk tier.
Disclaimer: Zone data represents county-level screening ranges and cannot predict the radon level in any specific home. Testing is the only reliable method to determine your home's radon concentration. This content is for informational purposes and is not medical advice.
Content review: Source-level retrieval dates
Editorial and Data Transparency
- Author
- RadonVerdict Data Team (Public Data and Cost Modeling)
- Content Review
- Source-level dates shown below
- Data Retrieved At
- 2026-02-24
Primary Sources
- EPA Map of Radon Zones (retrieved 2026-02-21)
- EPA A Citizen's Guide to Radon (retrieved 2026-05-05)
- CDC Environmental Public Health Tracking - Radon Testing (retrieved 2026-05-05)
- Pennsylvania DEP Radon Test Data by ZIP Code (retrieved 2026-05-05)
- Official PA radon program
- US Census Bureau, 2018-2022 American Community Survey 5-Year Estimates (retrieved 2026-02-24)