R
RadonVerdict
EPA Zone 2 - Moderate Risk

Radon Levels & Zone Map in Mercer County, PA

Direct Answer for basement and lowest-level tests: Mercer County sits in the gray zone. The map helps, but your own reading matters more than the countywide signal.

Quick Read

Treat the map as a hint, not the answer

Zone 2 is the gray area. A real reading is what decides whether you retest, track, or price mitigation.

County signal

Gray-zone county signal. Some homes stay low, others cross the EPA line.

What the number changes

2.0-3.9 pCi/L usually means retest or track. 4.0+ is where EPA action and quote planning start to matter.

Fastest next move

No reading: test first. Borderline results often need retest or long-term tracking.

Measured Radon Data

Mercer County evidence before the next step

Mercer County, PA has more than the EPA map: PA DEP Radon Division exposes 7,233 reported tests, 4.4 pCi/L county average, and 267.0 pCi/L high-end signal for 1990-2025.

Source window

1990-2025

Processed verdict

High measured burden

Solid confidence - 77/100

Primary result

4.4 pCi/L

9th percentile in-state

4.0+ signal

Not available

n/a in-state

High-end signal

267.0 pCi/L

27th percentile in-state

County-specific verdict

Mercer County crosses the action threshold in the official county data.

Mercer County is a test-now case because 4.4 pCi/L average. In-state rank: 9th percentile for average. No reading means get the first number; a 4.0+ home result should move straight to mitigation quotes or seller-credit math.

Real-estate use

Buyer or seller use: ask for a fresh lowest-level test before inspection deadlines, tie any 4.0+ result to a contractor quote, and do not negotiate from the county signal alone.

Mercer County should be treated as a county where a first test is urgent and a 4.0+ result should move directly into mitigation pricing or seller-credit math.

Choose Next Step

High-risk intent answer

Is radon bad in Mercer County?

Mercer County should be treated as a high-priority testing market because 4.4 pCi/L primary measured result, and 267.0 pCi/L high-end signal in PA DEP Radon Division data. A missing home reading means test now; a 4.0+ result means mitigation pricing or seller-credit math should start.

Fastest Path

Pick the situation that matches you

You should not need to read the whole guide before clicking one of these. Start with the lane that matches your current stage, then come back for the deeper reference only if you still need it.

Jump into a prefilled Mercer County action plan based on the result you already have, instead of starting from a generic cost page.

Already tested once and just want to watch the number trend?

View Airthings Corentium Home

Affiliate disclosure: we may earn a commission if you buy through these links.

County Evidence Snapshot

Mercer County testing context

Source-backed county page

Mercer County is a gray-zone county: the EPA map is useful context, but the local housing profile and your own home test decide the next step.

EPA map signal

Zone 2

County-level predicted indoor screening range, not a home-level test result.

Housing base

50,916

57th percentile among 67 PA counties with data.

Older housing share

27.8%

33th percentile in-state; older homes often need clearer test placement decisions.

Median home value

$146,100

Used as context for whether mitigation is a small maintenance item or a negotiation issue.

Measured Radon Data

Pennsylvania DEP Radon Test Data by ZIP Code

1990-2025

Basement average

4.4 pCi/L

At or above 4.0

Not available

Maximum reported

267.0 pCi/L

Reported tests

7,233

PA DEP floor rollup: basement average 4.4 pCi/L from 6,620 tests; first-floor average 2.6 pCi/L from 613 tests.

PA DEP Radon Division ZIP reports are based on short-term closed-house radon tests submitted by certified radon laboratories and testers from January 1990 through December 2025. PA DEP does not report an average when a ZIP has fewer than 30 tests. RadonVerdict rolls ZIP rows up to primary counties and treats the basement average as the primary local signal while preserving first-floor context.

RadonVerdict Processed Verdict

High measured burden

Solid confidence 77/100

Primary result rank

9th percentile

4.4 pCi/L

4.0+ rank

n/a

Not available at or above 4.0

High-end rank

27th percentile

267.0 pCi/L

Test volume rank

49th percentile

7,233 reported tests

How to use this county data

Data source

Basement and first-floor test data

Pennsylvania values are RadonVerdict county rollups from PA DEP ZIP reports, with basement readings treated as the primary local signal and first-floor readings preserved as a separate floor context.

What the numbers show

Basement-focused results

PA separates basement and first-floor tests. RadonVerdict treats basement results as the main signal for mitigation planning and keeps first-floor results as context.

Nearby comparison

Nearby comparison: Closest counties by county average: Wayne County (4.3 pCi/L) is just lower, and Crawford County (4.5 pCi/L) is just higher.

How this helps

Use this for basement-level test planning and 4.0+ mitigation or seller-credit decisions in Mercer County.

What the data says

Mercer County, PA is measurement-backed for 1990-2025. The measured average is 4.4 pCi/L. The high-end signal reaches 267.0 pCi/L.

Mercer County, PA sits at the 9th percentile for measured average, n/a for 4.0+ share, 27th percentile for high-end readings, and 49th percentile for test volume among 67 measured counties in the state. Closest counties by county average: Wayne County (4.3 pCi/L) is just lower, and Crawford County (4.5 pCi/L) is just higher.

What to do with it

Mercer County should be treated as a county where a first test is urgent and a 4.0+ result should move directly into mitigation pricing or seller-credit math.

Retest trigger: a 2.0-3.9 pCi/L home result should be confirmed here because 4.4 pCi/L average keeps the county from being a dismiss-it signal.

Solid confidence (77/100) from PA DEP Radon Division based on about 7,233 reported tests/properties plus comparable county-level measurement fields.

No reading yet

No reading yet: run a short-term test now, then confirm or price mitigation quickly if the result is elevated.

2.0-3.9 result

2.0-3.9 pCi/L: retest or track longer-term rather than dismissing the result, because the county distribution has meaningful elevated readings.

4.0+ result

4.0+ pCi/L: use the result for mitigation quotes, repair scope, or seller-credit negotiation; the county signal is no longer the deciding input.

Source hierarchy: PA DEP Radon Division is used for this county, with EPA zone and Census housing data kept as supporting context. Pennsylvania values are RadonVerdict county rollups from PA DEP ZIP reports, with basement readings treated as the primary local signal and first-floor readings preserved as a separate floor context.

Direct Answer

What radon risk level should homeowners assume in Mercer County?

Mercer County is currently categorized as EPA Zone 2 (Moderate Risk). Test all lived-in levels and confirm with follow-up testing if elevated.

Evidence Value
Area Mercer County, PA
EPA Zone Zone 2
Primary Recommendation Perform direct radon testing in the lowest livable level

Your Radon Reading

Enter your home's measured level; the starting value is only a planning example until you have your own result.

3.0 pCi/L
0 2.7 WHO 4.0 EPA 10 20+

Elevated - Consider Action

Your reading is below the US EPA action level (4.0 pCi/L), but this range still warrants follow-up testing. The World Health Organization uses 2.7 pCi/L as a tighter reference point.

If this was just a one-time snapshot, confirm it with another test or with longer tracking. If this level persists, planning mitigation is reasonable, especially for homes with frequent basement use, children, or pending real-estate transactions. Scroll down to see your estimated cost.

pCi/L

Understanding Radon Levels: Complete Reference

<2.0

Below 2.0 pCi/L - Lower Concern, Keep Testing

Below both the EPA (4.0) and WHO (2.7) action reference levels. This usually means mitigation is not the next immediate step after a confirmed result. The average outdoor radon level is approximately 0.4 pCi/L, and there is no known risk-free indoor level. Periodic testing is still recommended because levels can change over time due to seasonal variations, changes in home ventilation, or foundation settling.

2.0
-4.0

2.0 - 4.0 pCi/L - Elevated, Consider Action

Exceeds the World Health Organization's reference level of 2.7 pCi/L but falls below the US EPA action threshold. The EPA states that homeowners should "consider fixing" homes in this range, especially if the home has a basement used as living space, if children are present, or in connection with a real estate transaction. Practical next step: run a confirmatory long-term test, then compare mitigation quotes if levels remain elevated.

4.0
-8.0

4.0 - 8.0 pCi/L - Action Recommended

Exceeds the EPA action level of 4.0 pCi/L. The EPA and Surgeon General strongly recommend mitigation within a few months. At this level, prioritize confirmatory testing and contractor planning. Standard sub-slab depressurization systems typically reduce indoor levels by 80-99%.

8.0+

Above 8.0 pCi/L - Urgent Action Required

At these levels, the EPA recommends expedited mitigation - ideally within weeks, not months. Occupants should minimize time in lower-level rooms until the system is installed. Use a certified mitigator and request priority scheduling to shorten high-exposure time. Many mitigators offer priority scheduling for homes above 8.0 pCi/L.

Why Radon is Worth Monitoring in Mercer County

Mercer County falls in EPA Zone 2, where the predicted indoor screening range is between 2.0 and 4.0 pCi/L. Even when the countywide map signal sits below the EPA action level, geological variability means that some individual homes will still test above 4.0 pCi/L.

The soil composition in this area typically includes a mix of sedimentary formations that can contain moderate uranium deposits. Homes with basement or crawlspace foundations are particularly susceptible, as they provide more pathways for soil gas entry.

The World Health Organization recommends action at 2.7 pCi/L - well below the US EPA threshold. If you have children, spend significant time in below-grade rooms, or are buying/selling a home, testing is essential even in a Zone 2 area.

Radon & Health: What the Science Says

#2
Leading cause of
lung cancer
21K
US deaths per year
from radon
1 in 15
US homes above
4.0 pCi/L

Radon is a Class A carcinogen - the same classification as asbestos and tobacco smoke. The National Academy of Sciences estimates that radon causes approximately 21,000 lung cancer deaths annually in the United States, making it the leading environmental cause of cancer death.

Unlike smoking, radon exposure is involuntary and often invisible. There is no safe level of radon - risk increases linearly with exposure. The good news: radon mitigation systems are highly effective, typically reducing indoor levels by 80-99% within hours of activation.

Source: US Environmental Protection Agency, "A Citizen's Guide to Radon" (EPA 402/K-12/002). National Academy of Sciences, Biological Effects of Ionizing Radiation (BEIR VI) Report, 1999.

Step 1: Test Your Home

Testing is the only way to know your home's radon level. Zone data tells you the regional risk, but your home could be significantly higher or lower than the countywide pattern. For most homeowners, the right first purchase is a low-cost short-term test kit.

Recommended first step
Recommended Short-Term Test Kit
Results in 2-7 days - $15-$30
Already tested once?

A digital monitor is a better fit after your first result, for seasonal re-checks, or to keep tracking levels after mitigation.

View Airthings Corentium Home

As an Amazon Associate, RadonVerdict earns from qualifying purchases.

Already Know Your Level?

If your test shows 4.0 pCi/L or higher, get an itemized cost estimate specific to Mercer County - including regional labor rates and permit requirements.

Get Mitigation Cost Estimate ->

PA Radon Regulations

!
Seller Disclosure

Pennsylvania requires radon disclosure through the Seller's Property Disclosure Statement. The PA DEP also provides radon-specific guidance for real estate transactions.

yes
Professional Licensing

Pennsylvania requires certification for radon testing and mitigation professionals through the PA DEP.

Official state radon program

How to Test for Radon in Mercer County

1

Buy a Test Kit

Purchase a short-term charcoal test kit online or from a local hardware store. Cost: $15-$30. Place it in the lowest livable level of your home.

2

Wait 2-7 Days

Keep doors and windows closed (except normal entry/exit) during the test period. Avoid running whole-house fans. Mail the kit to the lab provided.

3

Read Your Results

If results are below 4.0 pCi/L, re-test every 2 years or use a monitor for ongoing tracking. If above 4.0, use our cost calculator to see mitigation options.

Related Radon Resources for Mercer County

Official State Resource

Pennsylvania radon program and rules

Use the state program link to verify local radon guidance, disclosure language, and contractor credential expectations before you act on an estimate.

Open official PA resource

Disclosure rule tracked

Pennsylvania requires radon disclosure through the Seller's Property Disclosure Statement. The PA DEP also provides radon-specific guidance for real estate transactions.

State licensing required

Pennsylvania requires certification for radon testing and mitigation professionals through the PA DEP.

Sources & Methodology

Radon zone classifications for Mercer County are sourced from the EPA's Map of Radon Zones, which uses geological surveys, indoor radon measurements, and soil permeability data to assign each county a risk tier.

Disclaimer: Zone data represents county-level screening ranges and cannot predict the radon level in any specific home. Testing is the only reliable method to determine your home's radon concentration. This content is for informational purposes and is not medical advice.

Content review: Source-level retrieval dates

Editorial and Data Transparency

Author
RadonVerdict Data Team (Public Data and Cost Modeling)
Content Review
Source-level dates shown below
Data Retrieved At
2026-02-24