Radon Levels & Zone Map in Mifflin County, PA
Direct Answer for basement and lowest-level tests: Mifflin County backs up the EPA high-zone warning. Official county data shows 13.4 pCi/L as the primary measured signal. Do the home test, and treat a confirmed 4.0+ result as mitigation-planning territory.
Treat this as a test-now county
The official source signal is strong enough that a first test is the minimum; a confirmed 4.0+ result should move into cost or credit planning.
Official measured data puts this county in a high-priority testing lane.
2.0-3.9 pCi/L usually means retest or track. 4.0+ is where EPA action and quote planning start to matter.
No reading: test now. Reading at 4.0+: move into mitigation planning.
Measured Radon Data
Mifflin County evidence before the next step
Mifflin County, PA has more than the EPA map: PA DEP Radon Division exposes 3,489 reported tests, 13.4 pCi/L county average, and 709.3 pCi/L high-end signal for 1990-2025.
Source window
1990-2025
County evidence type
High measured burden
County context only; your home test controls the decision.
Primary result
13.4 pCi/L
91st percentile in-state
4.0+ signal
Not available
n/a in-state
High-end signal
709.3 pCi/L
72nd percentile in-state
Official evidence dossier
Source record for Mifflin County, PA
Pennsylvania values are RadonVerdict county rollups from PA DEP ZIP reports, with basement readings treated as the primary local signal and first-floor readings preserved as a separate floor context.
Primary public source
Basement and first-floor test data
Measurement window
1990-2025
Retrieved / checked
2026-05-05
County FIPS
42087
Evidence stack
County source
Basement and first-floor test data
Primary source used for the county evidence row.
Federal map
EPA Map of Radon Zones
Zone 1 is context, not a property result.
Housing context
US Census ACS housing context
26.1% built before 1980; 21,391 housing units.
State follow-up
State radon program
Use the state source before hiring or interpreting local rules.
Primary field
13.4 pCi/L
Median field
Not available
4.0+ field
Not available
Sample / volume
3,489 reported tests
Metric shape
PA separates basement and first-floor tests. RadonVerdict treats basement results as the main signal for mitigation planning and keeps first-floor results as context.
Source limitation
PA DEP Radon Division ZIP reports are based on short-term closed-house radon tests submitted by certified radon laboratories and testers from January 1990 through December 2025. PA DEP does not report an average when a ZIP has fewer than 30 tests. RadonVerdict rolls ZIP rows up to primary counties and treats the basement average as the primary local signal while preserving first-floor context.
Property-level limit
Not a property-level diagnosis. The county record explains local evidence; your home's own test result controls the next decision.
County-specific interpretation
Mifflin County crosses the action threshold in the official county data.
Mifflin County is a test-now case because 13.4 pCi/L average. In-state rank: 91st percentile for average. No reading means get the first number; a 4.0+ home result should move straight to mitigation quotes or seller-credit math.
Real-estate use
Buyer or seller use: ask for a fresh lowest-level test before inspection deadlines, tie any 4.0+ result to a contractor quote, and do not negotiate from the county signal alone.
Mifflin County should be treated as a county where a first test is urgent and a 4.0+ result should move directly into mitigation pricing or seller-credit math.
Use This EvidenceOfficial state path
Open the state radon program
Use state rules and local program contacts before choosing a contractor.
EPA hiring guidance
Find a qualified radon provider
EPA points homeowners to state programs and national proficiency listings.
Certified professional search
Search NRPP-certified pros
Use this after you have a valid result or need professional testing.
High-risk intent answer
Is radon bad in Mifflin County?
Mifflin County should be treated as a high-priority testing market because 13.4 pCi/L primary measured result, and 709.3 pCi/L high-end signal in PA DEP Radon Division data. A missing home reading means test now; a 4.0+ result means mitigation pricing or seller-credit math should start.
Enter the result. Pick the deal side. Get the route.
Official measured data puts this county in a high-priority testing lane.
County signal
13.4 pCi/L
At or above 4.0
Not available
Decision side
Foundation clue
Choose your next step
Start from the exact job, not another generic radon article.
Pick the situation that matches Mifflin County, PA. Each route keeps the reading, deal side, or foundation clue attached so the next page answers the search instead of resetting the user.
Failed inspection
I need a repair or seller credit number
Open the local credit path with a 4.0+ buyer scenario already selected.
Open negotiation route4.0+ pCi/L
I have a high result and need the cost path
Go straight to the county estimate, quote context, and contractor checklist.
Open cost route2.0-3.9 pCi/L
I need to know if this number is bad
Use the level explanation first, then decide whether to retest, monitor, or price mitigation.
Open level routeNo test yet
I need the first valid result
Start with kit placement, timing, closed-house conditions, and result interpretation.
Open testing routePick the situation that matches you
You should not need to read the whole guide before clicking one of these. Start with the lane that matches your current stage, then come back for the deeper reference only if you still need it.
Jump into a prefilled Mifflin County action plan based on the result you already have, instead of starting from a generic cost page.
I have not tested yet
Do not price mitigation blind. Get the first number, then decide whether you need monitoring, quotes, or nothing at all.
My result is 2.0-3.9
Usually confirm the reading first. If it keeps showing up, use the county evidence and official guidance before deciding whether pricing makes sense.
My result is 4.0+
This is the EPA action line. Use the local cost page before calling contractors so you know the likely scope, timing, and budget.
I am buying or selling
Turn the reading into a credit or repair number before negotiation starts. This is the faster path than arguing from a generic article.
Already tested once and need the cleanest follow-up path?
Review retesting stepsCounty Evidence Snapshot
Mifflin County testing context
Mifflin County should be treated as a testing-priority county because the official source signal backs up the EPA high-zone warning. Official county data shows 13.4 pCi/L as the primary measured signal. Use the EPA map as context, but let the home test decide mitigation or credit planning.
EPA map signal
Zone 1
County-level predicted indoor screening range, not a home-level test result.
Housing base
21,391
28th percentile among 67 PA counties with data.
Older housing share
26.1%
27th percentile in-state; older homes often need clearer test placement decisions.
Median home value
$131,300
Used as context for whether mitigation is a small maintenance item or a negotiation issue.
Measured Radon Data
Pennsylvania DEP Radon Test Data by ZIP Code
1990-2025
Basement average
13.4 pCi/L
At or above 4.0
Not available
Maximum reported
709.3 pCi/L
Reported tests
3,489
PA DEP Radon Division ZIP reports are based on short-term closed-house radon tests submitted by certified radon laboratories and testers from January 1990 through December 2025. PA DEP does not report an average when a ZIP has fewer than 30 tests. RadonVerdict rolls ZIP rows up to primary counties and treats the basement average as the primary local signal while preserving first-floor context.
County evidence interpretation
High measured burden
Primary result rank
91st percentile
13.4 pCi/L
4.0+ rank
n/a
Not available at or above 4.0
High-end rank
72nd percentile
709.3 pCi/L
Test volume rank
34th percentile
3,489 reported tests
How to use this county data
Data source
Basement and first-floor test data
Pennsylvania values are RadonVerdict county rollups from PA DEP ZIP reports, with basement readings treated as the primary local signal and first-floor readings preserved as a separate floor context.
What the numbers show
Basement-focused results
PA separates basement and first-floor tests. RadonVerdict treats basement results as the main signal for mitigation planning and keeps first-floor results as context.
Nearby comparison
Nearby comparison: Closest counties by county average: Lebanon County (13.0 pCi/L) is just lower, and Schuylkill County (13.9 pCi/L) is just higher.
How this helps
Use this for basement-level test planning and 4.0+ mitigation or seller-credit decisions in Mifflin County.
What the data says
Mifflin County, PA is measurement-backed for 1990-2025. The measured average is 13.4 pCi/L. The high-end signal reaches 709.3 pCi/L.
Mifflin County, PA sits at the 91st percentile for measured average, n/a for 4.0+ share, 72nd percentile for high-end readings, and 34th percentile for test volume among 67 measured counties in the state. Closest counties by county average: Lebanon County (13.0 pCi/L) is just lower, and Schuylkill County (13.9 pCi/L) is just higher.
What to do with it
Mifflin County should be treated as a county where a first test is urgent and a 4.0+ result should move directly into mitigation pricing or seller-credit math.
Retest trigger: a 2.0-3.9 pCi/L home result should be confirmed here because 13.4 pCi/L average keeps the county from being a dismiss-it signal.
Source-backed context from PA DEP Radon Division based on about 3,489 reported tests/properties plus comparable county-level measurement fields.
No reading yet
No reading yet: run a short-term test now, then confirm or price mitigation quickly if the result is elevated.
2.0-3.9 result
2.0-3.9 pCi/L: retest or track longer-term rather than dismissing the result, because the county distribution has meaningful elevated readings.
4.0+ result
4.0+ pCi/L: use the result for mitigation quotes, repair scope, or seller-credit negotiation; the county signal is no longer the deciding input.
Source hierarchy: PA DEP Radon Division is used for this county, with EPA zone and Census housing data kept as supporting context. Pennsylvania values are RadonVerdict county rollups from PA DEP ZIP reports, with basement readings treated as the primary local signal and first-floor readings preserved as a separate floor context.
Direct Answer
Is radon bad in Mifflin County?
Mifflin County should be treated as a high-priority testing market because 13.4 pCi/L primary measured result, and 709.3 pCi/L high-end signal in PA DEP Radon Division data. A missing home reading means test now; a 4.0+ result means mitigation pricing or seller-credit math should start.
| Evidence | Value |
|---|---|
| Area | Mifflin County, PA |
| EPA Zone | Zone 1 |
| Primary Recommendation | Perform direct radon testing in the lowest livable level |
Your Radon Reading
Enter your home's measured level; the starting value is only a planning example until you have your own result.
Warning: Action Required - EPA Threshold Exceeded
At 5.5 pCi/L, this reading is above the EPA action level. Prompt mitigation planning is recommended after confirmatory testing.
Typical mitigation systems reduce radon by 80-99%. See your itemized cost estimate below.
Understanding Radon Levels: Complete Reference
Below 2.0 pCi/L - Lower Concern, Keep Testing
Below both the EPA (4.0) and WHO (2.7) action reference levels. This usually means mitigation is not the next immediate step after a confirmed result. The average outdoor radon level is approximately 0.4 pCi/L, and there is no known risk-free indoor level. Periodic testing is still recommended because levels can change over time due to seasonal variations, changes in home ventilation, or foundation settling.
-4.0
2.0 - 4.0 pCi/L - Elevated, Consider Action
Exceeds the World Health Organization's reference level of 2.7 pCi/L but falls below the US EPA action threshold. The EPA states that homeowners should "consider fixing" homes in this range, especially if the home has a basement used as living space, if children are present, or in connection with a real estate transaction. Practical next step: run a confirmatory long-term test, then compare mitigation quotes if levels remain elevated.
-8.0
4.0 - 8.0 pCi/L - Action Recommended
Exceeds the EPA action level of 4.0 pCi/L. The EPA and Surgeon General strongly recommend mitigation within a few months. At this level, prioritize confirmatory testing and contractor planning. Standard sub-slab depressurization systems typically reduce indoor levels by 80-99%.
Above 8.0 pCi/L - Urgent Action Required
At these levels, the EPA recommends expedited mitigation - ideally within weeks, not months. Occupants should minimize time in lower-level rooms until the system is installed. Use a certified mitigator and request priority scheduling to shorten high-exposure time. Many mitigators offer priority scheduling for homes above 8.0 pCi/L.
Why Radon is a Testing Priority in Mifflin County
The EPA map is only the starting layer for Mifflin County. Official county data shows 13.4 pCi/L as the primary measured signal. That source-backed signal is why the practical move is testing or retesting before treating the county as low urgency.
This still is not a diagnosis for any single home. Foundation type, lowest-level use, pressure differences, and small geological changes can move one house above or below the county pattern.
If you do not have a reading yet, start with a short-term test in the lowest lived-in level. If the result is 2.0-3.9 pCi/L, confirm it; if it is 4.0+ pCi/L, move into mitigation pricing or seller-credit planning.
Radon & Health: What the Science Says
lung cancer
from radon
4.0 pCi/L
Radon is a Class A carcinogen - the same classification as asbestos and tobacco smoke. The National Academy of Sciences estimates that radon causes approximately 21,000 lung cancer deaths annually in the United States, making it the leading environmental cause of cancer death.
Unlike smoking, radon exposure is involuntary and often invisible. There is no safe level of radon - risk increases linearly with exposure. The good news: radon mitigation systems are highly effective, typically reducing indoor levels by 80-99% within hours of activation.
Source: US Environmental Protection Agency, "A Citizen's Guide to Radon" (EPA 402/K-12/002). National Academy of Sciences, Biological Effects of Ionizing Radiation (BEIR VI) Report, 1999.
Step 1: Test Your Home
Testing is the only way to know your home's radon level. Zone and county data tell you the regional signal, but your home could be significantly higher or lower than the countywide pattern. Start with a valid test setup before using any cost path.
State radon programs and EPA provider guidance are the right reference before hiring or confirming local requirements.
Open the state radon programAlready Know Your Level?
If your test shows 4.0 pCi/L or higher, get an itemized cost estimate specific to Mifflin County - including regional labor rates and permit requirements.
Get Mitigation Cost Estimate ->PA Radon Regulations
Pennsylvania requires radon disclosure through the Seller's Property Disclosure Statement. The PA DEP also provides radon-specific guidance for real estate transactions.
Pennsylvania requires certification for radon testing and mitigation professionals through the PA DEP.
How to Test for Radon in Mifflin County
Buy a Test Kit
Purchase a short-term charcoal test kit online or from a local hardware store. Cost: $15-$30. Place it in the lowest livable level of your home.
Wait 2-7 Days
Keep doors and windows closed (except normal entry/exit) during the test period. Avoid running whole-house fans. Mail the kit to the lab provided.
Read Your Results
If results are below 4.0 pCi/L, re-test every 2 years or use a monitor for ongoing tracking. If above 4.0, use our cost calculator to see mitigation options.
Related Radon Resources for Mifflin County
Explore Other PA Counties
Official State Resource
Pennsylvania radon program and rules
Use the state program link to verify local radon guidance, disclosure language, and contractor credential expectations before you act on an estimate.
Disclosure rule tracked
Pennsylvania requires radon disclosure through the Seller's Property Disclosure Statement. The PA DEP also provides radon-specific guidance for real estate transactions.
State licensing required
Pennsylvania requires certification for radon testing and mitigation professionals through the PA DEP.
Sources & Methodology
Radon zone classifications for Mifflin County are sourced from the EPA's Map of Radon Zones, which uses geological surveys, indoor radon measurements, and soil permeability data to assign each county a risk tier.
Disclaimer: Zone data represents county-level screening ranges and cannot predict the radon level in any specific home. Testing is the only reliable method to determine your home's radon concentration. This content is for informational purposes and is not medical advice.
Content review: Source-level retrieval dates
Editorial and Data Transparency
- Author
- RadonVerdict Data Team (Public Data and Cost Modeling)
- Content Review
- Source-level dates shown below
- Data Retrieved At
- 2026-02-24
Primary Sources
- EPA Map of Radon Zones (retrieved 2026-02-21)
- EPA A Citizen's Guide to Radon (retrieved 2026-05-05)
- CDC Environmental Public Health Tracking - Radon Testing (retrieved 2026-05-05)
- Pennsylvania DEP Radon Test Data by ZIP Code (retrieved 2026-05-05)
- Official PA radon program
- US Census Bureau, 2018-2022 American Community Survey 5-Year Estimates (retrieved 2026-02-24)