R
RadonVerdict
EPA Zone 2 - Moderate Risk

Radon Levels & Zone Map in Brown County, WI

Direct Answer for basement and lowest-level tests: Brown County is classified as EPA Zone 2 (Moderate Risk). Predicted average indoor screening levels fall between 2.0 and 4.0 pCi/L. While below the EPA action level, many individual homes still test above 4.0 due to local soil conditions and foundation type.

Decision Flow

Already Have a Reading?

Jump into a prefilled Brown County action plan based on the result you already have, instead of starting from a generic cost page.

Test First

Need to Test Before You Price?

Start with the testing guide if you do not have a confirmed number yet, or use a short-term kit to screen the lowest lived-in level first.

Affiliate disclosure: we may earn a commission if you buy through the kit link.

Direct Answer

What radon risk level should homeowners assume in Brown County?

Brown County is currently categorized as EPA Zone 2 (Moderate Risk). Test all lived-in levels and confirm with follow-up testing if elevated.

Evidence Value
Area Brown County, WI
EPA Zone Zone 2
Primary Recommendation Perform direct radon testing in the lowest livable level

Your Radon Reading

Enter your home's measured level or use the Brown County average

3.0 pCi/L
0 2.7 WHO 4.0 EPA 10 20+

Safe Range

Your reading is within the safe range. Both the EPA (4.0) and WHO (2.7) thresholds are not exceeded. Mitigation is not needed right now. We recommend periodic monitoring with a digital radon detector.

Get a Home Radon Monitor (~$30)

Elevated - Consider Action

Your reading is below the US EPA action level (4.0 pCi/L), but this range still warrants follow-up testing. The World Health Organization uses 2.7 pCi/L as a tighter reference point.

If this level persists on confirmatory testing, planning mitigation is reasonable, especially for homes with frequent basement use, children, or pending real-estate transactions. Scroll down to see your estimated cost.

Verify with Long-term Monitor (~$150)

Warning: Action Required - EPA Threshold Exceeded

At 3.0 pCi/L, this reading is above the EPA action level. Prompt mitigation planning is recommended after confirmatory testing.

Now
3.0
After
0.3-0.8

Typical mitigation systems reduce radon by 80-99%. See your itemized cost estimate below.

pCi/L

Understanding Radon Levels: Complete Reference

<2.0

Below 2.0 pCi/L - Acceptable Range

Below both the EPA (4.0) and WHO (2.7) action levels. No mitigation needed. The average outdoor radon level is approximately 0.4 pCi/L. Periodic monitoring is still recommended, as levels can change over time due to seasonal variations, changes in home ventilation, or foundation settling.

2.0
-4.0

2.0 - 4.0 pCi/L - Elevated, Consider Action

Exceeds the World Health Organization's reference level of 2.7 pCi/L but falls below the US EPA action threshold. The EPA states that homeowners should "consider fixing" homes in this range, especially if the home has a basement used as living space, if children are present, or in connection with a real estate transaction. Practical next step: run a confirmatory long-term test, then compare mitigation quotes if levels remain elevated.

4.0
-8.0

4.0 - 8.0 pCi/L - Action Recommended

Exceeds the EPA action level of 4.0 pCi/L. The EPA and Surgeon General strongly recommend mitigation within a few months. At this level, prioritize confirmatory testing and contractor planning. Standard sub-slab depressurization systems typically reduce indoor levels by 80-99%.

8.0+

Above 8.0 pCi/L - Urgent Action Required

At these levels, the EPA recommends expedited mitigation - ideally within weeks, not months. Occupants should minimize time in lower-level rooms until the system is installed. Use a certified mitigator and request priority scheduling to shorten high-exposure time. Many mitigators offer priority scheduling for homes above 8.0 pCi/L.

Why Radon is Worth Monitoring in Brown County

Brown County falls in EPA Zone 2, where predicted average indoor screening levels range between 2.0 and 4.0 pCi/L. While the county average may fall below the EPA action level, geological variability means that a significant percentage of individual homes will still test above 4.0 pCi/L.

The soil composition in this area typically includes a mix of sedimentary formations that can contain moderate uranium deposits. Homes with basement or crawlspace foundations are particularly susceptible, as they provide more pathways for soil gas entry.

The World Health Organization recommends action at 2.7 pCi/L - well below the US EPA threshold. If you have children, spend significant time in below-grade rooms, or are buying/selling a home, testing is essential even in a Zone 2 area.

Radon & Health: What the Science Says

#2
Leading cause of
lung cancer
21K
US deaths per year
from radon
1 in 15
US homes above
4.0 pCi/L

Radon is a Class A carcinogen - the same classification as asbestos and tobacco smoke. The National Academy of Sciences estimates that radon causes approximately 21,000 lung cancer deaths annually in the United States, making it the leading environmental cause of cancer death.

Unlike smoking, radon exposure is involuntary and often invisible. There is no safe level of radon - risk increases linearly with exposure. The good news: radon mitigation systems are highly effective, typically reducing indoor levels by 80-99% within hours of activation.

Source: US Environmental Protection Agency, "A Citizen's Guide to Radon" (EPA 402/K-12/002). National Academy of Sciences, Biological Effects of Ionizing Radiation (BEIR VI) Report, 1999.

Step 1: Test Your Home

Testing is the only way to know your home's radon level. Zone data tells you the regional risk, but your home could be significantly higher or lower than the county average.

As an Amazon Associate, RadonVerdict earns from qualifying purchases.

Already Know Your Level?

If your test shows 4.0 pCi/L or higher, get an itemized cost estimate specific to Brown County - including regional labor rates and permit requirements.

Get Mitigation Cost Estimate ->

WI Radon Regulations

!
Seller Disclosure

Wisconsin requires sellers to complete a Real Estate Condition Report that includes known radon test results and environmental hazards.

-
Professional Licensing

Wisconsin does not require specific radon licensing. NRPP or AARST certification is recommended.

Official state radon program

How to Test for Radon in Brown County

1

Buy a Test Kit

Purchase a short-term charcoal test kit online or from a local hardware store. Cost: $15-$30. Place it in the lowest livable level of your home.

2

Wait 2-7 Days

Keep doors and windows closed (except normal entry/exit) during the test period. Avoid running whole-house fans. Mail the kit to the lab provided.

3

Read Your Results

If results are below 4.0 pCi/L, re-test every 2 years. If above 4.0, use our cost calculator to see mitigation options.

Related Radon Resources for Brown County

Sources & Methodology

Radon zone classifications for Brown County are sourced from the EPA's Map of Radon Zones, which uses geological surveys, indoor radon measurements, and soil permeability data to assign each county a risk tier.

Disclaimer: Zone data represents county-level averages and cannot predict the radon level in any specific home. Testing is the only reliable method to determine your home's radon concentration. This content is for informational purposes and is not medical advice.

Page Content Last Reviewed: 2026-04-09

Editorial and Data Transparency

Author
RadonVerdict Editorial Team (Data and Content Team)
Last Reviewed
2026-04-09
Data Retrieved At
2026-02-24