Radon Levels & Zone Map in Cache County, UT
Direct Answer for basement and lowest-level tests: Cache County is stronger than the EPA zone label suggests. Official county data shows 7.4 pCi/L and 53.8% at or above 4.0. Do the home test, and treat a confirmed 4.0+ result as mitigation-planning territory.
Treat this as a test-now county
The official source signal is strong enough that a first test is the minimum; a confirmed 4.0+ result should move into cost or credit planning.
Official measured data puts this county in a high-priority testing lane.
2.0-3.9 pCi/L usually means retest or track. 4.0+ is where EPA action and quote planning start to matter.
No reading: test first. Borderline results often need retest or long-term tracking.
Measured Radon Data
Cache County evidence before the next step
Cache County, UT has more than the EPA map: Utah DHHS EPHT exposes 3,146 reported tests, 7.4 pCi/L county average, 4.4 pCi/L median, 53.8% of reported tests at or above 4.0 pCi/L, and 152.7 pCi/L high-end signal for 2006-2019.
Source window
2006-2019
County evidence type
High measured burden
County context only; your home test controls the decision.
Primary result
7.4 pCi/L
83rd percentile in-state
4.0+ signal
53.8%
81st percentile in-state
High-end signal
152.7 pCi/L
76th percentile in-state
Official evidence dossier
Source record for Cache County, UT
Utah values come from DHHS EPHT/IBIS radon test kit result queries. RadonVerdict combines county average, test count, 4.0+ count, median, and maximum queries for the same 2006-2019 period; Utah notes that tests outside its subsidized kit program are not included.
Primary public source
Official county measurements
Measurement window
2006-2019
Retrieved / checked
2026-05-06
County FIPS
49005
Evidence stack
County source
Official county measurements
Primary source used for the county evidence row.
Federal map
EPA Map of Radon Zones
Zone 2 is context, not a property result.
Housing context
US Census ACS housing context
58.7% built before 1980; 44,260 housing units.
State follow-up
State radon program
Use the state source before hiring or interpreting local rules.
Primary field
7.4 pCi/L
Median field
4.4 pCi/L
4.0+ field
53.8%
Sample / volume
3,146 reported tests
Metric shape
This is the most useful setup: county average, 4.0+ share, high-end readings, and 3,146 reported tests/properties can be read together instead of relying on one number.
Source limitation
Utah EPHT says the Indoor Radon Program receives radon test results from test kits purchased through its subsidized program; home radon tests purchased and conducted outside of this program are not included. These are short-term tests in private homes, below-detect results are halved, and county values are reported test records rather than a statistically designed survey of every home.
Property-level limit
Not a property-level diagnosis. The county record explains local evidence; your home's own test result controls the next decision.
County-specific interpretation
Cache County crosses the action threshold in the official county data.
Cache County is a test-now case because 7.4 pCi/L average, 4.4 pCi/L median, and 53.8% of reported tests at or above 4.0. In-state rank: 83rd percentile for average, and 81st percentile for 4.0+ share. No reading means get the first number; a 4.0+ home result should move straight to mitigation quotes or seller-credit math.
Real-estate use
Buyer or seller use: ask for a fresh lowest-level test before inspection deadlines, tie any 4.0+ result to a contractor quote, and do not negotiate from the county signal alone.
Cache County should be treated as a county where a first test is urgent and a 4.0+ result should move directly into mitigation pricing or seller-credit math.
Use This EvidenceOfficial state path
Open the state radon program
Use state rules and local program contacts before choosing a contractor.
EPA hiring guidance
Find a qualified radon provider
EPA points homeowners to state programs and national proficiency listings.
Certified professional search
Search NRPP-certified pros
Use this after you have a valid result or need professional testing.
High-risk intent answer
Is radon bad in Cache County?
Cache County should be treated as a high-priority testing market because 53.8% of reported tests at or above 4.0 pCi/L, 7.4 pCi/L primary measured result, and 152.7 pCi/L high-end signal in Utah DHHS EPHT data. A missing home reading means test now; a 4.0+ result means mitigation pricing or seller-credit math should start.
Enter the result. Pick the deal side. Get the route.
Official measured data puts this county in a high-priority testing lane.
County signal
7.4 pCi/L
At or above 4.0
53.8%
Decision side
Foundation clue
Search intent router
Start from the exact job, not another generic radon article.
Pick the situation that matches Cache County, UT. Each route keeps the reading, deal side, or foundation clue attached so the next page answers the search instead of resetting the user.
Failed inspection
I need a repair or seller credit number
Open the local credit path with a 4.0+ buyer scenario already selected.
Open negotiation route4.0+ pCi/L
I have a high result and need the cost path
Go straight to the county estimate, quote context, and contractor checklist.
Open cost route2.0-3.9 pCi/L
I need to know if this number is bad
Use the level explanation first, then decide whether to retest, monitor, or price mitigation.
Open level routeNo test yet
I need the first valid result
Start with kit placement, timing, closed-house conditions, and result interpretation.
Open testing routePick the situation that matches you
You should not need to read the whole guide before clicking one of these. Start with the lane that matches your current stage, then come back for the deeper reference only if you still need it.
Jump into a prefilled Cache County action plan based on the result you already have, instead of starting from a generic cost page.
I have not tested yet
Do not price mitigation blind. Get the first number, then decide whether you need monitoring, quotes, or nothing at all.
My result is 2.0-3.9
Usually confirm the reading first. If it keeps showing up, use the county evidence and official guidance before deciding whether pricing makes sense.
My result is 4.0+
This is the EPA action line. Use the local cost page before calling contractors so you know the likely scope, timing, and budget.
I am buying or selling
Turn the reading into a credit or repair number before negotiation starts. This is the faster path than arguing from a generic article.
Already tested once and need the cleanest follow-up path?
Review retesting stepsCounty Evidence Snapshot
Cache County testing context
Cache County should be treated as a testing-priority county because the official source signal is stronger than the EPA zone label suggests. Official county data shows 7.4 pCi/L and 53.8% at or above 4.0. Use the EPA map as context, but let the home test decide mitigation or credit planning.
EPA map signal
Zone 2
County-level predicted indoor screening range, not a home-level test result.
Housing base
44,260
83th percentile among 29 UT counties with data.
Older housing share
58.7%
66th percentile in-state; older homes often need clearer test placement decisions.
Median home value
$351,700
Used as context for whether mitigation is a small maintenance item or a negotiation issue.
Measured Radon Data
Utah EPHT Radon Test Kit Results
2006-2019
Average result
7.4 pCi/L
At or above 4.0
53.8%
Maximum reported
152.7 pCi/L
Reported tests
3,146
Utah EPHT says the Indoor Radon Program receives radon test results from test kits purchased through its subsidized program; home radon tests purchased and conducted outside of this program are not included. These are short-term tests in private homes, below-detect results are halved, and county values are reported test records rather than a statistically designed survey of every home.
County evidence interpretation
High measured burden
Primary result rank
83rd percentile
7.4 pCi/L
4.0+ rank
81st percentile
53.8% at or above 4.0
High-end rank
76th percentile
152.7 pCi/L
Test volume rank
89th percentile
3,146 reported tests
How to use this county data
Data source
Official county measurements
Utah values come from DHHS EPHT/IBIS radon test kit result queries. RadonVerdict combines county average, test count, 4.0+ count, median, and maximum queries for the same 2006-2019 period; Utah notes that tests outside its subsidized kit program are not included.
What the numbers show
Fuller county picture
This is the most useful setup: county average, 4.0+ share, high-end readings, and 3,146 reported tests/properties can be read together instead of relying on one number.
Nearby comparison
Nearby comparison: Closest counties by share of tests at or above 4.0 pCi/L: Wayne County (53.5%) is just lower, and Juab County (54.7%) is just higher.
How this helps
Use this to decide how urgently to test, retest, or plan mitigation after a 4.0+ result.
What the data says
Cache County, UT is measurement-backed for 2006-2019. The measured average is 7.4 pCi/L, and 53.8% of reported results are at or above 4.0 pCi/L. The high-end signal reaches 152.7 pCi/L.
Cache County, UT sits at the 83rd percentile for measured average, 81st percentile for 4.0+ share, 76th percentile for high-end readings, and 89th percentile for test volume among 29 measured counties in the state. Closest counties by county average: Juab County (7.3 pCi/L) is just lower, and Wayne County (8.4 pCi/L) is just higher.
What to do with it
Cache County should be treated as a county where a first test is urgent and a 4.0+ result should move directly into mitigation pricing or seller-credit math.
Retest trigger: a 2.0-3.9 pCi/L home result should be confirmed here because 7.4 pCi/L average, 4.4 pCi/L median, and 53.8% of reported tests at or above 4.0 keeps the county from being a dismiss-it signal.
Source-backed context from Utah DHHS EPHT based on about 3,146 reported tests/properties plus comparable county-level measurement fields.
No reading yet
No reading yet: run a short-term test now, then confirm or price mitigation quickly if the result is elevated.
2.0-3.9 result
2.0-3.9 pCi/L: retest or track longer-term rather than dismissing the result, because the county distribution has meaningful elevated readings.
4.0+ result
4.0+ pCi/L: use the result for mitigation quotes, repair scope, or seller-credit negotiation; the county signal is no longer the deciding input.
Source hierarchy: Utah DHHS EPHT is used for this county, with EPA zone and Census housing data kept as supporting context. Utah values come from DHHS EPHT/IBIS radon test kit result queries. RadonVerdict combines county average, test count, 4.0+ count, median, and maximum queries for the same 2006-2019 period; Utah notes that tests outside its subsidized kit program are not included.
Direct Answer
Is radon bad in Cache County?
Cache County should be treated as a high-priority testing market because 53.8% of reported tests at or above 4.0 pCi/L, 7.4 pCi/L primary measured result, and 152.7 pCi/L high-end signal in Utah DHHS EPHT data. A missing home reading means test now; a 4.0+ result means mitigation pricing or seller-credit math should start.
| Evidence | Value |
|---|---|
| Area | Cache County, UT |
| EPA Zone | Zone 2 |
| Primary Recommendation | Perform direct radon testing in the lowest livable level |
Your Radon Reading
Enter your home's measured level; the starting value is only a planning example until you have your own result.
Elevated - Consider Action
Your reading is below the US EPA action level (4.0 pCi/L), but this range still warrants follow-up testing. The World Health Organization uses 2.7 pCi/L as a tighter reference point.
If this was just a one-time snapshot, confirm it with another test or with longer tracking. If this level persists, planning mitigation is reasonable, especially for homes with frequent basement use, children, or pending real-estate transactions. Scroll down to see your estimated cost.
Understanding Radon Levels: Complete Reference
Below 2.0 pCi/L - Lower Concern, Keep Testing
Below both the EPA (4.0) and WHO (2.7) action reference levels. This usually means mitigation is not the next immediate step after a confirmed result. The average outdoor radon level is approximately 0.4 pCi/L, and there is no known risk-free indoor level. Periodic testing is still recommended because levels can change over time due to seasonal variations, changes in home ventilation, or foundation settling.
-4.0
2.0 - 4.0 pCi/L - Elevated, Consider Action
Exceeds the World Health Organization's reference level of 2.7 pCi/L but falls below the US EPA action threshold. The EPA states that homeowners should "consider fixing" homes in this range, especially if the home has a basement used as living space, if children are present, or in connection with a real estate transaction. Practical next step: run a confirmatory long-term test, then compare mitigation quotes if levels remain elevated.
-8.0
4.0 - 8.0 pCi/L - Action Recommended
Exceeds the EPA action level of 4.0 pCi/L. The EPA and Surgeon General strongly recommend mitigation within a few months. At this level, prioritize confirmatory testing and contractor planning. Standard sub-slab depressurization systems typically reduce indoor levels by 80-99%.
Above 8.0 pCi/L - Urgent Action Required
At these levels, the EPA recommends expedited mitigation - ideally within weeks, not months. Occupants should minimize time in lower-level rooms until the system is installed. Use a certified mitigator and request priority scheduling to shorten high-exposure time. Many mitigators offer priority scheduling for homes above 8.0 pCi/L.
Why Radon is a Testing Priority in Cache County
The EPA map is only the starting layer for Cache County. Official county data shows 7.4 pCi/L and 53.8% at or above 4.0. That source-backed signal is why the practical move is testing or retesting before treating the county as low urgency.
This still is not a diagnosis for any single home. Foundation type, lowest-level use, pressure differences, and small geological changes can move one house above or below the county pattern.
If you do not have a reading yet, start with a short-term test in the lowest lived-in level. If the result is 2.0-3.9 pCi/L, confirm it; if it is 4.0+ pCi/L, move into mitigation pricing or seller-credit planning.
Radon & Health: What the Science Says
lung cancer
from radon
4.0 pCi/L
Radon is a Class A carcinogen - the same classification as asbestos and tobacco smoke. The National Academy of Sciences estimates that radon causes approximately 21,000 lung cancer deaths annually in the United States, making it the leading environmental cause of cancer death.
Unlike smoking, radon exposure is involuntary and often invisible. There is no safe level of radon - risk increases linearly with exposure. The good news: radon mitigation systems are highly effective, typically reducing indoor levels by 80-99% within hours of activation.
Source: US Environmental Protection Agency, "A Citizen's Guide to Radon" (EPA 402/K-12/002). National Academy of Sciences, Biological Effects of Ionizing Radiation (BEIR VI) Report, 1999.
Step 1: Test Your Home
Testing is the only way to know your home's radon level. Zone and county data tell you the regional signal, but your home could be significantly higher or lower than the countywide pattern. Start with a valid test setup before using any cost path.
State radon programs and EPA provider guidance are the right reference before hiring or confirming local requirements.
Open the state radon programAlready Know Your Level?
If your test shows 4.0 pCi/L or higher, get an itemized cost estimate specific to Cache County - including regional labor rates and permit requirements.
Get Mitigation Cost Estimate ->UT Radon Regulations
Utah requires sellers to disclose known defects through the Seller's Property Condition Disclosure.
Utah does not require specific radon licensing.
How to Test for Radon in Cache County
Buy a Test Kit
Purchase a short-term charcoal test kit online or from a local hardware store. Cost: $15-$30. Place it in the lowest livable level of your home.
Wait 2-7 Days
Keep doors and windows closed (except normal entry/exit) during the test period. Avoid running whole-house fans. Mail the kit to the lab provided.
Read Your Results
If results are below 4.0 pCi/L, re-test every 2 years or use a monitor for ongoing tracking. If above 4.0, use our cost calculator to see mitigation options.
Related Radon Resources for Cache County
Explore Other UT Counties
Official State Resource
Utah radon program and rules
Use the state program link to verify local radon guidance, disclosure language, and contractor credential expectations before you act on an estimate.
Disclosure rule tracked
Utah requires sellers to disclose known defects through the Seller's Property Condition Disclosure.
Credential note
Utah does not require specific radon licensing.
Sources & Methodology
Radon zone classifications for Cache County are sourced from the EPA's Map of Radon Zones, which uses geological surveys, indoor radon measurements, and soil permeability data to assign each county a risk tier.
Disclaimer: Zone data represents county-level screening ranges and cannot predict the radon level in any specific home. Testing is the only reliable method to determine your home's radon concentration. This content is for informational purposes and is not medical advice.
Content review: Source-level retrieval dates
Editorial and Data Transparency
- Author
- RadonVerdict Data Team (Public Data and Cost Modeling)
- Content Review
- Source-level dates shown below
- Data Retrieved At
- 2026-02-24
Primary Sources
- EPA Map of Radon Zones (retrieved 2026-02-21)
- EPA A Citizen's Guide to Radon (retrieved 2026-05-05)
- CDC Environmental Public Health Tracking - Radon Testing (retrieved 2026-05-05)
- Utah EPHT Radon Test Kit Results (retrieved 2026-05-06)
- Official UT radon program
- US Census Bureau, 2018-2022 American Community Survey 5-Year Estimates (retrieved 2026-02-24)